April 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Apr 1 05:21:18 EDT 2012
Ending: Mon Apr 30 17:43:27 EDT 2012
Messages: 260

• bgscan? Can I scan while not connected to a network?   Jouni Malinen
• Certificate verification failed, error 19 (self signed certificate in certificate chain)   Jouni Malinen
  • Certificate verification failed, error 19 (self signed certificate in certificate chain)   Michael Zintakis
    • Certificate verification failed, error 19 (self signed certificate in certificate chain)   Jouni Malinen
      • Certificate verification failed, error 19 (self signed certificate in certificate chain)   Michael Zintakis
• [PATCH] Complete the support of P2P in the 5GHz band   Jouni Malinen
  • [PATCH] Complete the support of P2P in the 5GHz band   Marotte, Fabien
• [PATCH] driver_nl80211: report signal strength from nl80211   Jouni Malinen
• hostap_pci: wifi0: detected fid change   Jar
  • hostap_pci: wifi0: detected fid change   Jar
• [PATCH] Fix double free in a wpa enterprise setup, after a client is connecting and hostapd can not reach radius server. It will double free while retransmitting the radius package.   Jouni Malinen
• Station not connecting with WPS (2.0), open security using wpa supplicant.   Jouni Malinen
• [PATCH] Create DBus getter/setter for ScanInterval   Jouni Malinen
• [PATCH] hostapd: only update already-set beacons when processing OLBC   Jouni Malinen
• [PATCH] pass signal strength through, fix units   Jouni Malinen
• WPS by pin is not connecting first time to AP   ashish agarwal
  • WPS by pin is not connecting first time to AP   Jouni Malinen
• [PATCH] DBus: add ability to report probe requests   Jouni Malinen
• [PATCH] DBus: add ability to report probe requests   Jouni Malinen
  • [PATCH] DBus: add ability to report probe requests   Johannes Berg
• [PATCH] P2P: Add deinit_p2p_cli op   Jouni Malinen
• [PATCH] P2P: notify about disconnection only when needed   Jouni Malinen
• IBSS Association and authentication timeout   Jouni Malinen
• bug? bgscan param is not written back on "save_config"   Ed W
  • bug? bgscan param is not written back on "save_config"   Ed W
    • bug? bgscan param is not written back on "save_config"   Jouni Malinen
• Config Methods for Probe Response   Takashi Kawamoto
  • How to use WEP method for EAP-SIM?   阳
• Doubts regarding implementing 802.11r   rupesh sanagapalli
• wpa_supplicant on WinCE6   Srinivas
• wpa supplicant roaming issues   Fabio Coatti
• wpa_supplicant scan speed   Jochem Kempkens
  • wpa_installation error   Saurabh Thakur
    • wpa_installation error   Saurabh Thakur
    • [PATCH] Clarify comment in wpa_supplicant/defconfig.   Angie Chinchilla
    • [PATCH] Clarify comment in wpa_supplicant/defconfig.   Jouni Malinen
    • [PATCH] wpa_supplicant: Print initialization information on startup.   greearb at candelatech.com
    • [PATCH] wpa_supplicant: Print initialization information on startup.   Jouni Malinen
    • [PATCH] wpa_supplicant: Print initialization information on startup.   Ben Greear
    • [PATCH] wpa_supplicant: Print initialization information on startup.   Jouni Malinen
  • EAP-TLS disabling TLS Session reuse and SSL_CTX_set_options( SSL_OP_NO_TICKET)   Phillips, Owain
    • EAP-TLS disabling TLS Session reuse and SSL_CTX_set_options( SSL_OP_NO_TICKET)   Jouni Malinen
  • hostap-1.0-rc3 update   Bjarke Istrup Pedersen
    • hostap-1.0-rc3 update   Angie Chinchilla
    • hostap-1.0-rc3 update   Bjarke Istrup Pedersen
    • [PATCH 0/5] Automatic scanning support   Tomasz Bursztyka
    • [PATCH 1/5] Adding autoscan parameters support in config file   Tomasz Bursztyka
    • [PATCH 2/5] Removing bgscan config macros in wpa_supplicant.c   Tomasz Bursztyka
    • [PATCH 3/5] Automatic Scanning support added   Tomasz Bursztyka
    • [PATCH 4/5] Adding AutoScan interface method to set or unset autoscan parameters   Tomasz Bursztyka
    • [PATCH 5/5] Adding autoscan module named exponential   Tomasz Bursztyka
    • [PATCH] P2P: Fix crash for failure case when WSC PIN is entered incorrectly.   Angie Chinchilla
    • [PATCH] P2P: Fix crash for failure case when WSC PIN is entered incorrectly.   Jouni Malinen
    • [PATCH v2] P2P: Disconnect P2P group on supplicant deinit   nirav shah
    • [PATCH v2] P2P: Disconnect P2P group on supplicant deinit   Jouni Malinen
• [PATCH] P2P: Disconnect P2P group on supplicant deinit   Shah, Nirav J2
• 802.11n ht connects then disconnects   Daniel Havey
  • 802.11n ht connects then disconnects   Johannes Berg
    • 802.11n ht connects then disconnects   Daniel Havey
      • 802.11n ht connects then disconnects   Johannes Berg
      • [PATCH v2] wpa_supplicant: Print initialization information on startup.   greearb at candelatech.com
      • [PATCH v2] wpa_supplicant: Print initialization information on startup.   Jouni Malinen
      • [PATCH] hostap: Ensure netlink recv buf size is large enough.   greearb at candelatech.com
      • [PATCH] hostap: Add fuzz to idle-timer calculations.   greearb at candelatech.com
      • [PATCH] hostap: Add fuzz to idle-timer calculations.   Jouni Malinen
      • [PATCH 1/2] Make bind failure messages unique.   greearb at candelatech.com
      • [PATCH 2/2] Better wpa_cli error messages when connect fails.   greearb at candelatech.com
      • [PATCH 2/2] Better wpa_cli error messages when connect fails.   Jouni Malinen
      • [PATCH 1/2] Make bind failure messages unique.   Jouni Malinen
      • [PATCH 0/5] Automatic scanning support   Tomasz Bursztyka
      • [PATCH 1/5] Adding autoscan parameters support in config file   Tomasz Bursztyka
      • [PATCH 2/5] Removing bgscan config macros in wpa_supplicant.c   Tomasz Bursztyka
      • [PATCH 3/5] Automatic Scanning support added   Tomasz Bursztyka
      • [PATCH 4/5] Adding AutoScan interface method to set or unset autoscan parameters   Tomasz Bursztyka
      • [PATCH 5/5] Adding autoscan module named exponential   Tomasz Bursztyka
      • [PATCH 0/5 - v2] Automatic scanning support   Tomasz Bursztyka
      • [PATCH 1/5] Adding autoscan parameters support in config file   Tomasz Bursztyka
      • [PATCH 2/5] Removing bgscan config macros in wpa_supplicant.c   Tomasz Bursztyka
      • [PATCH 3/5] Automatic Scanning support added   Tomasz Bursztyka
      • [PATCH 4/5] Adding AutoScan interface method to set or unset autoscan parameters   Tomasz Bursztyka
      • [PATCH 5/5] Adding autoscan module named exponential   Tomasz Bursztyka
      • [PATCH 0/5 - v2] Automatic scanning support   Bondar, Alexander
      • [PATCH 0/5 - v2] Automatic scanning support   Tomasz Bursztyka
      • [PATCH 0/5 - v2] Automatic scanning support   Bondar, Alexander
      • [PATCH 0/5 - v2] Automatic scanning support   Tomasz Bursztyka
• {SPAM} xt_802.1X Enable IP / Use Idle-Time / Session limits to limit traffic [netfilter/wired]   Gregory Nietsky
  • xt_802.1X Enable IP / Use Idle-Time / Session limits to limit traffic [netfilter/wired] [COMMIT]   Gregory Nietsky
    • xt_802.1X Enable IP / Use Idle-Time / Session limits to limit traffic [netfilter/wired] [COMMIT]   Jouni Malinen
      • xt_802.1X Enable IP / Use Idle-Time / Session limits to limit traffic [netfilter/wired] [COMMIT]   Gregory Nietsky
      • xt_802.1X Enable IP / Use Idle-Time / Session limits to limit traffic [netfilter/wired] [COMMIT]   Ed W
• ioctl[PRISM2_IOCTL_HOSTAPD]: Invalid argument using hostapd-0.7.3   Laurento
• [PATCH] wpa_s: add script to convert debug output to pcap   Johannes Berg
  • [PATCH] wpa_s: add script to convert debug output to pcap   Jouni Malinen
  • EAP-TLS and TLS Session reuse in 0.7.3   Phillips, Owain
• [PATCH] For concurrency scenarios we should not update the scan re=   Neeraj Garg
• [PATCH] P2P: For concurrency scenarios we should not update the scan results without P2PIE to p2p group interface   Neeraj Kumar Garg
  • [PATCH] P2P: For concurrency scenarios we should not update the scan results without P2PIE to p2p group interface   Jouni Malinen
    • [PATCH] P2P: For concurrency scenarios we should not update the scan results without P2PIE to p2p group interface   Neeraj Kumar Garg
      • [PATCH] P2P: For concurrency scenarios we should not update the scan results without P2PIE to p2p group interface   Jouni Malinen
• Doubts regarding implementing 802.11r   Jouni Malinen
• [PATCH] supplicant: Make unix socket non-blocking.   Ben Greear
  • [PATCH 1/3] supplicant: Make unix socket non-blocking.   greearb at candelatech.com
  • [PATCH 2/3] wpa_supplicant: Support minimum interval between scan attempts.   greearb at candelatech.com
  • [PATCH 3/3] supplicant: Allow limiting number of concurrent associations.   greearb at candelatech.com
• [PATCH] Add to bss command option RANGE=ALL|N1-N2 [MASK=0xH]   Jouni Malinen
• [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboring BSS (prevent fallback in 150Mb mode)   Jouni Malinen
  • [PROPOSAL] Add hostapd.conf parameter to skipcheckforneighboring BSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
• [PROPOSAL] Add hostapd.conf parameter to skip check forneighboring BSS (prevent fallback in 150Mb mode)   Jouni Malinen
  • [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboring BSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
    • [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboring BSS (prevent fallback in 150Mb mode)   Jouni Malinen
      • [PROPOSAL] Add hostapd.conf parameter to skipcheckforneighboring BSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
  • [PROPOSAL] Add hostapd.conf parameter to skip check forneighboring BSS (prevent fallback in 150Mb mode)   Alex Vorona
• [RFC 2/4] P2P: Handling single channel concurrency   Jouni Malinen
  • [RFC 2/4] P2P: Handling single channel concurrency   Jithu Jance
    • [RFC 2/4] P2P: Handling single channel concurrency   Jouni Malinen
• [RFC 1/4] P2P: Handling single channel concurrency   Jouni Malinen
  • [RFC 1/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 3/4] P2P: Handling single channel concurrency   Jouni Malinen
  • [RFC 3/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 4/4] P2P: Handling single channel concurrency   Jouni Malinen
  • [RFC 4/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 4/4] P2P: Handling single channel concurrency   Jithu Jance
• [PATCH] wpa_supplicant: Use bss_id list for 'bss FIRST' command   Dmitry Shmidt
  • [PATCH] wpa_supplicant: Use bss_id list for 'bss FIRST' command   Jouni Malinen
• wpa_supplicant in ad-hoc mode, using wpa on a Linux 3 kernel   Kees-Jan Hermans
  • wpa_supplicant in ad-hoc mode, using wpa on a Linux 3 kernel   Roland Koebler
    • wpa_supplicant in ad-hoc mode, using wpa on a Linux 3 kernel   Dan Williams
  • wpa_supplicant in ad-hoc mode, using wpa on a Linux 3 kernel   Jouni Malinen
    • [PATCH] P2P: Fix Dbus property getters to default to "/" for Group, PeerGO   nirav shah
    • [PATCH] P2P: Fix Dbus property getters to default to "/" for Group, PeerGO   Jouni Malinen
    • [PATCH] P2P/DBUS: Cleanup P2PDevice DBUS interface for hostap-1 release   nirav shah
    • [PATCH] P2P/DBUS: Cleanup P2PDevice DBUS interface for hostap-1 release   Jouni Malinen
  • Is WPS supported on Linux systems using the wext driver?   sathis
• Error starting hostapd on 3.4.0-rc2-wl+   Ben Greear
  • Error starting hostapd on 3.4.0-rc2-wl+   Wojciech Dubowik
    • [PATCH 0/2] Miscellaneous fixes for P2P support   Adrien Bustany
    • [PATCH 1/2] P2P: Allow wildcard service discovery from DBus API   Adrien Bustany
    • [PATCH 2/2] P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service   Adrien Bustany
    • [PATCH 0/2 - v2] Miscellaneous fixes for P2P support   Adrien Bustany
    • [PATCH 1/2] P2P: Allow wildcard service discovery from DBus API   Adrien Bustany
    • [PATCH 1/2] P2P: Allow wildcard service discovery from DBus API   Jouni Malinen
    • [PATCH 2/2] P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service   Adrien Bustany
    • [PATCH 2/2] P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service   Jouni Malinen
    • [PATCH 2/2] P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service   Adrien Bustany
    • [PATCH 2/2] P2P: Don't rely on dictionary ordering in wpas_dbus_handler_p2p_add_service   Jouni Malinen
• hostap-1.0-rc3 update   Chinchilla, Angie V
  • hostap-1.0-rc3 update   Bjarke Istrup Pedersen
    • hostap-1.0-rc3 update   Chinchilla, Angie V
• No subject   daisuke niwa
  • Using Hostap to connect to Android Device   sudharshan viswanathan
    • [PATCH] service: handle g_sequence when relevant   Tomasz Bursztyka
    • [PATCH] service: handle g_sequence when relevant   Marcel Holtmann
    • [PATCH] service: handle g_sequence when relevant   Tomasz Bursztyka
• hostap-1.0-rc3 available   Chinchilla, Angie V
  • wpa_supplicant scan time   James Coggan
    • wpa_supplicant scan time   Ed W
      • wpa_supplicant scan time   James Coggan
• [PATCH] Do not share the scan results from STA interface to p2p in=   Neeraj Garg
• Wired Driver To use TUN/TAP interface only passing if authorised   Gregory Nietsky
  • Wired Driver To use TUN/TAP interface only passing if authorised   Ed W
    • Wired Driver To use TUN/TAP interface only passing if authorised   Gregory Nietsky
      • [RFC 1/3] wpa_supplicant: Define 20/40 BSS Coexistence IEs   Rajkumar Manoharan
      • [RFC 2/3] wpa_supplicant: Add 2040 BSS intolerance support in station mode   Rajkumar Manoharan
      • [RFC 2/3] wpa_supplicant: Add 2040 BSS intolerance support in station mode   Jouni Malinen
      • [RFC 2/3] wpa_supplicant: Add 2040 BSS intolerance support in station mode   Rajkumar Manoharan
      • [RFC 2/3] wpa_supplicant: Add 2040 BSS intolerance support in station mode   Rajkumar Manoharan
      • [RFC 3/3] wpa_supplicant: Add configuration parameter for 2040coex   Rajkumar Manoharan
      • [RFC 3/3] wpa_supplicant: Add configuration parameter for 2040coex   Jouni Malinen
      • [RFC 3/3] wpa_supplicant: Add configuration parameter for 2040coex   Rajkumar Manoharan
      • [RFC 1/3] wpa_supplicant: Define 20/40 BSS Coexistence IEs   Jouni Malinen
      • wpa_supplicant: WPS Support-WSC_NACK packets   hari.c36 at wipro.com
      • wpa_supplicant: WPS Support-WSC_NACK packets   Jouni Malinen
      • wpa_supplicant: WPS Support-WSC_NACK packets   raghunathan.kailasanathan at wipro.com
      • wpa_supplicant: WPS Support-WSC_NACK packets   Jouni Malinen
  • [PATCH] Export disconnect reason code to dbus   Gary Morain
    • [PATCH] Export disconnect reason code to dbus   Dan Williams
      • [PATCH] Export disconnect reason code to dbus   Gary Morain
    • [PATCH] Export disconnect reason code to dbus   Jouni Malinen
  • [PATCH] P2P: Remove unused variable   Masashi Honma
    • [PATCH] P2P: Remove unused variable   Jouni Malinen
• [PATCH] bgscan_learn: Load BSS entries from current SSID only   Piotr.Nakraszewicz at tieto.com
  • [PATCH] bgscan_learn: Load BSS entries from current SSID only   Piotr.Nakraszewicz at tieto.com
• hostap-1.0-rc3 available   Chinchilla, Angie V
  • [PATCH 0/7 v3] Automatic scanning support   Tomasz Bursztyka
  • [PATCH 1/7] Adding autoscan parameters support in config file   Tomasz Bursztyka
  • [PATCH 2/7] Automatic Scanning support added   Tomasz Bursztyka
  • [PATCH 3/7] Adding AutoScan interface method to set or unset autoscan parameters   Tomasz Bursztyka
  • [PATCH 4/7] Adding ctrl iface command for autoscan   Tomasz Bursztyka
  • [PATCH 5/7] Adding autoscan command into wpa_cli   Tomasz Bursztyka
  • [PATCH 6/7] Adding autoscan module named exponential   Tomasz Bursztyka
  • [PATCH 7/7] Adding a simple periodic autoscan module   Tomasz Bursztyka
  • VLAN support recently broken   michael-dev
    • WPS - Authendication timed out   Sathis Kanna
    • WPS - Authendication timed out   Jouni Malinen
• [PATCH 2/7] Automatic Scanning support added   Bondar, Alexander
  • [PATCH 2/7] Automatic Scanning support added   Tomasz Bursztyka
    • [PATCH] Enable parsing of multiple ciphers.   Lukasz Kucharczyk
    • How to use android branch ?   Masashi Honma
      • How to use android branch ?   Jouni Malinen
      • How to use android branch ?   Michael Zintakis
      • How to use android branch ?   Jouni Malinen
      • How to use android branch ?   Michael Zintakis
      • How to use android branch ?   Ryu Cheol
      • How to use android branch ?   Jouni Malinen
      • How to use android branch ?   Masashi Honma
  • [PATCH] Export disconnect reason code to dbus   Gary Morain
• [PATCH] atheros: fix build when CONFIG_WPS is disabled   Baruch Siach
  • [PATCH 1/3] wpa_supplicant: Define 20/40 BSS Coexistence IEs   Rajkumar Manoharan
  • [PATCH 2/3] wpa_supplicant: Add 2040 BSS intolerance support in station mode   Rajkumar Manoharan
  • [PATCH 3/3] wpa_supplicant: Add support to handle OBSS scan request   Rajkumar Manoharan
  • D-Bus interface   André Prata
    • D-Bus interface   Dan Williams
      • D-Bus interface   André Prata
      • D-Bus interface   Dan Williams
    • D-Bus interface   Jouni Malinen
      • D-Bus interface   André Prata
      • D-Bus interface   Shah, Nirav J2
      • wpa_supplicant: WPS Support-WSC_NACK packets   hari.c36 at wipro.com
      • wpa_supplicant: WPS Support-WSC_NACK packets   Cristian Ionescu-Idbohrn
• Strange problem with ath9k and ASUS N66U AP.   Ben Greear
  • Strange problem with ath9k and ASUS N66U AP.   Ben Greear
    • Strange problem with ath9k and ASUS N66U AP.   Jouni Malinen
      • Strange problem with ath9k and ASUS N66U AP.   Ben Greear
      • Strange problem with ath9k and ASUS N66U AP.   Nicolas Cavallari
      • Strange problem with ath9k and ASUS N66U AP.   Ben Greear
• Problem with CONFIG_CTRL_IFACE=n   Marcel Holtmann
  • Problem with CONFIG_CTRL_IFACE=n   Marcel Holtmann
  • Problem with CONFIG_CTRL_IFACE=n   Jouni Malinen
    • Problem with CONFIG_CTRL_IFACE=n   Marcel Holtmann
      • Problem with CONFIG_CTRL_IFACE=n   Jouni Malinen
      • Problem with CONFIG_CTRL_IFACE=n   Marcel Holtmann
• Ad-hoc network problem   Harish
• Android branch compiled against Gingerbread Patch   Keane, Ben (STRX)
• hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • hostapd-1-rc3: Wireless lags and unstable connection   Bjarke Istrup Pedersen
  • hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • hostapd-1-rc3: Wireless lags and unstable connection   Helmut Schaa
  • hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • hostapd-1-rc3: Wireless lags and unstable connection   Helmut Schaa
  • hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • hostapd-1-rc3: Wireless lags and unstable connection   Jouni Malinen
  • hostapd-1-rc3: Wireless lags and unstable connection   Valeriy Kucherenko
  • How to test EAP-SIM fast reauthentication?   Andrejs Cainikovs
• [PATCH] Adds signal threshold option for auto-reconnect scenarios   Bartosz.Markowski at tieto.com
• keyboard repeating and mouse freezes with wpa_supplicant   Zé
  • keyboard repeating and mouse freezes with wpa_supplicant   Valeriy Kucherenko
    • keyboard repeating and mouse freezes with wpa_supplicant   Zé
    • keyboard repeating and mouse freezes with wpa_supplicant   Valeriy Kucherenko
    • keyboard repeating and mouse freezes with wpa_supplicant   Zé
  • keyboard repeating and mouse freezes with wpa_supplicant   Jouni Malinen
    • keyboard repeating and mouse freezes with wpa_supplicant   Zé
• Hostapd 1.0_rc3 drops IPv6   Conrad Kostecki
  • Hostapd 1.0_rc3 drops IPv6   Christian Lamparter
• hi Hostap   sebelk at gmail.com
• [PATCH] Print out the commands received by the ctrl_interace   Jithu Jance
• Using hostapd ctrl_iface to set configuration parameters   Baruch Siach
• EAP-SIM howto?   Benjamin Henrion
• RADIUS based station reauth request   newuse at qip.ru
• Request: Soft-MISO via central server with new hostapd version   newuse at qip.ru

Last message date: Mon Apr 30 17:43:27 EDT 2012
Archived on: Mon Apr 30 17:43:36 EDT 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...