Error starting hostapd on 3.4.0-rc2-wl+

Ben Greear greearb at candelatech.com
Thu Apr 12 13:39:34 EDT 2012


Anyone seen something like this?  Seems it fails to set some
flags and then gives up?

If anyone has successfully used hostapd on 3.4.0-rc2, please
let me know...

1334251891.329962: random: Trying to read entropy from /dev/random
1334251891.330096: Configuration file: wifi/hostapd_vap0.conf
1334251891.330943: ctrl_interface_group=0
1334251891.332950: nl80211: interface vap0 in phy wiphy0
1334251891.333036: rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
1334251891.333303: nl80211: Using driver-based off-channel TX
1334251891.333333: nl80211: TDLS supported
1334251891.333352: nl80211: TDLS external setup
1334251891.333514: nl80211: Add own interface ifindex 11
1334251891.334074: nl80211: Set mode ifindex 11 iftype 3 (AP)
1334251891.334326: nl80211: Setup AP - device_ap_sme=0 use_monitor=0
1334251891.334390: nl80211: Subscribe to mgmt frames with AP handle 0x834e8a0
1334251891.334423: nl80211: Register frame type=0xb0 nl_handle=0x834e8a0
1334251891.334480: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334555: nl80211: Register frame type=0x0 nl_handle=0x834e8a0
1334251891.334577: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334628: nl80211: Register frame type=0x20 nl_handle=0x834e8a0
1334251891.334650: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334700: nl80211: Register frame type=0xa0 nl_handle=0x834e8a0
1334251891.334722: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334772: nl80211: Register frame type=0xc0 nl_handle=0x834e8a0
1334251891.334794: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334843: nl80211: Register frame type=0xd0 nl_handle=0x834e8a0
1334251891.334865: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.334915: nl80211: Register frame type=0x40 nl_handle=0x834e8a0
1334251891.334937: nl80211: Register frame match - hexdump(len=0): [NULL]
1334251891.335227: Could not set interface vap0 flags: Invalid argument
1334251891.340512: netlink: Operstate: linkmode=0, operstate=6
1334251891.340578: nl80211: Set mode ifindex 11 iftype 2 (STATION)
1334251891.340770: nl80211: Unsubscribe mgmt frames handle 0x834e8a0 (AP teardown)
1334251891.340894: nl80211: Subscribe to mgmt frames with non-AP handle 0x834cc78
1334251891.340926: nl80211: Register frame type=0xd0 nl_handle=0x834cc78
1334251891.340948: nl80211: Register frame match - hexdump(len=1): 06
1334251891.341008: nl80211: Register frame type=0xd0 nl_handle=0x834cc78
1334251891.341030: nl80211: Register frame match - hexdump(len=2): 0a 07
1334251891.341081: nl80211: Unsubscribe mgmt frames handle 0x834cc78 (deinit)
1334251891.341120: nl80211 driver initialization failed.

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com



More information about the HostAP mailing list