Error starting hostapd on 3.4.0-rc2-wl+

Wojciech Dubowik wojciech.dubowik at neratec.com
Fri Apr 13 02:33:04 EDT 2012


After applying this patch from Luca I got it running again on my side.
[PATCH] mac80211: check IEEE80211_HW_QUEUE_CONTROL in ieee80211_check_queues()

Br,
Wojtek

----- Original Message -----
> Anyone seen something like this?  Seems it fails to set some
> flags and then gives up?
> 
> If anyone has successfully used hostapd on 3.4.0-rc2, please
> let me know...
> 
> 1334251891.329962: random: Trying to read entropy from /dev/random
> 1334251891.330096: Configuration file: wifi/hostapd_vap0.conf
> 1334251891.330943: ctrl_interface_group=0
> 1334251891.332950: nl80211: interface vap0 in phy wiphy0
> 1334251891.333036: rfkill: initial event: idx=0 type=1 op=0 soft=0
> hard=0
> 1334251891.333303: nl80211: Using driver-based off-channel TX
> 1334251891.333333: nl80211: TDLS supported
> 1334251891.333352: nl80211: TDLS external setup
> 1334251891.333514: nl80211: Add own interface ifindex 11
> 1334251891.334074: nl80211: Set mode ifindex 11 iftype 3 (AP)
> 1334251891.334326: nl80211: Setup AP - device_ap_sme=0 use_monitor=0
> 1334251891.334390: nl80211: Subscribe to mgmt frames with AP handle
> 0x834e8a0
> 1334251891.334423: nl80211: Register frame type=0xb0
> nl_handle=0x834e8a0
> 1334251891.334480: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334555: nl80211: Register frame type=0x0
> nl_handle=0x834e8a0
> 1334251891.334577: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334628: nl80211: Register frame type=0x20
> nl_handle=0x834e8a0
> 1334251891.334650: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334700: nl80211: Register frame type=0xa0
> nl_handle=0x834e8a0
> 1334251891.334722: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334772: nl80211: Register frame type=0xc0
> nl_handle=0x834e8a0
> 1334251891.334794: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334843: nl80211: Register frame type=0xd0
> nl_handle=0x834e8a0
> 1334251891.334865: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.334915: nl80211: Register frame type=0x40
> nl_handle=0x834e8a0
> 1334251891.334937: nl80211: Register frame match - hexdump(len=0):
> [NULL]
> 1334251891.335227: Could not set interface vap0 flags: Invalid
> argument
> 1334251891.340512: netlink: Operstate: linkmode=0, operstate=6
> 1334251891.340578: nl80211: Set mode ifindex 11 iftype 2 (STATION)
> 1334251891.340770: nl80211: Unsubscribe mgmt frames handle 0x834e8a0
> (AP teardown)
> 1334251891.340894: nl80211: Subscribe to mgmt frames with non-AP
> handle 0x834cc78
> 1334251891.340926: nl80211: Register frame type=0xd0
> nl_handle=0x834cc78
> 1334251891.340948: nl80211: Register frame match - hexdump(len=1): 06
> 1334251891.341008: nl80211: Register frame type=0xd0
> nl_handle=0x834cc78
> 1334251891.341030: nl80211: Register frame match - hexdump(len=2): 0a
> 07
> 1334251891.341081: nl80211: Unsubscribe mgmt frames handle 0x834cc78
> (deinit)
> 1334251891.341120: nl80211 driver initialization failed.
> 
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 


More information about the HostAP mailing list