March 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Mar 1 00:15:12 EST 2012
Ending: Sat Mar 31 18:29:08 EDT 2012
Messages: 114

• wpa_supplicant deauthentication frames   Hector Akamine
  • wpa_supplicant deauthentication frames   Jouni Malinen
• [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboring BSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
  • [P2P] p2p_peer oper_freq update on group formation/termination   Bartosz Sławomir Białek
• Setting hw_mode with some specific options (b&g mode, n mode only etc.) through hostapd   DarshanPrajapati
  • Setting hw_mode with some specific options (b&g mode, n mode onlyetc.) through hostapd   Valeriy Kucherenko
• [PATCH] Filter input parameters in p2p_serv_disc_external   Grzegorz Bajorski
  • [PATCH] Filter input parameters in p2p_serv_disc_external   Jouni Malinen
• Can it be possible to set txpower of AP by using hostapd   DarshanPrajapati
• Network died on laptop, 10-99th time   gene heskett
  • [PATCH] P2P: Add error message for invalid PIN   Masashi Honma
    • [PATCH] P2P: Add error message for invalid PIN   Jouni Malinen
    • [PATCH] P2P: Add error message for invalid PIN   Masashi Honma
• [PROPOSAL] Add hostapd.conf parameter to skip check forneighboring BSS (prevent fallback in 150Mb mode)   Alex Vorona
  • [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboringBSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
• [PATCH] AP: remove ssi_signal from ap_info   Johannes Berg
  • [PATCH] AP: remove ssi_signal from ap_info   Jouni Malinen
• [PATCH] pass signal strength through, fix units   Johannes Berg
• [PATCH] DBus: add ability to report probe requests   Johannes Berg
• [PATCH] driver_nl80211: report signal strength from nl80211   Johannes Berg
  • [PATCH] BSS: Fix use-after-realloc   Eliad Peller
  • [PATCH] BSS: Fix use-after-realloc   Jouni Malinen
  • [PATCH] BSS: Fix use-after-realloc   Eliad Peller
  • [PATCH] BSS: Fix use-after-realloc   Jouni Malinen
  • [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
  • [PATCH] P2P: Add deinit_p2p_cli op   Vitaly Wool
  • [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
  • [PATCH] P2P: Add deinit_p2p_cli op   Vitaly Wool
  • [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
• EAP TTLS peer_challenge buffer allocation   Kaustav Dey Biswas
  • EAP TTLS peer_challenge buffer allocation   Jouni Malinen
    • [PATCH] P2P: ignore neg_req with the last used dialog_token   Eliad Peller
    • [PATCH] P2P: ignore neg_req with the last used dialog_token   Jouni Malinen
    • [PATCH] P2P: ignore neg_req with the last used dialog_token   Eliad Peller
  • [PATCH] Select the BSD license terms as the only license alternative   Masashi Honma
    • [PATCH] Select the BSD license terms as the only license alternative   Jouni Malinen
      • [PATCH] P2P: notify about disconnection only when needed   Eliad Peller
• [PATCH v2] dbus: Make P2P group properties accessible individually   Jouni Malinen
  • Query on channel configuration   uday kiran
    • Query on channel configuration   Jouni Malinen
  • [RFC 1/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 2/4] P2P: Handling single channel concurrency   Jithu Jance
  • [RFC 2/4] P2P: Handling single channel concurrency   Johannes Berg
• [RFC 3/4] P2P: Handling single channel concurrency   Jithu Jance
  • [RFC 4/4] P2P: Handling single channel concurrency   Jithu Jance
  • How to make a patch ?   Masashi Honma
    • How to make a patch ?   Madhvapathi Sriram
      • [PATCH] hostapd: only update already-set beacons when processing OLBC   Luciano Coelho
  • Query on channel configuration   uday kiran
  • ralink, rt3070, with wpa_supplicant, donot support wps_pbc, wps_pin   郭同彬
• wpa supplicant roaming issues   Fabio Coatti
  • wpa supplicant roaming issues   Jouni Malinen
• hostapd + atheros 9285 pcie   Igor Pinotti
  • ralink, rt3070, with wpa_supplicant, donot support wps_pbc, wps_pin   郭同彬
    • hostap-1.0-rc3 update   Angie Chinchilla
• Broadcast issue   Jens Dackenberg
  • Broadcast issue   Helmut Schaa
  • Broadcast issue   Jens Dackenberg
  • Real System Make Money Easy 2012 Trend‏‏‏‏‏‏‏‏s‏‏   Geril Senem
• [PATCH] debug: add option to log to tracing   Johannes Berg
  • [PATCH] debug: add option to log to tracing   Jouni Malinen
• Certificate verification failed, error 19 (self signed certificate in certificate chain)   Michael Zintakis
• bgscan? Can I scan while not connected to a network?   Ed W
  • bgscan? Can I scan while not connected to a network?   Ed W
    • [PATCH] Complete the support of P2P in the 5GHz band   fabienx.marotte at linux.intel.com
    • [PATCH] Create DBus getter/setter for ScanInterval   Mukesh Agrawal
• how to save the output of hostapd   why
  • how to save the output of hostapd   Ognjen Bezanov
  • how to save the output of hostapd   Jouni Malinen
    • how to save the output of hostapd   David Martin
      • how to save the output of hostapd   Masashi Honma
      • how to save the output of hostapd   David Martin
      • Is there any STA simulator for hostapd performance testing?   Li Chao
  • Station not connecting with WPS (2.0), open security using wpa supplicant.   Rajan Vijayaraghavan
• Is complete support for 802.11r implemented in wext drivers   rupesh sanagapalli
  • Is complete support for 802.11r implemented in wext drivers   Jouni Malinen
  • Unencrypted Beacons on Initialisation   Jonny Milliken
    • Unencrypted Beacons on Initialisation   Jouni Malinen
      • Unencrypted Beacons on Initialisation   Jonny Milliken
      • Unencrypted Beacons on Initialisation   Jouni Malinen
      • Unencrypted Beacons on Initialisation   Jonny Milliken
• No RADIUS packets noticed in wireshark   suneth namal
• Wireless Isoloation   Anand Moon
  • No RADIUS packets noticed in wireshark   suneth namal
    • No RADIUS packets noticed in wireshark   Jouni Malinen
• Channel 165 not allowed for P2P   Kaustav Dey Biswas
  • Channel 165 not allowed for P2P   Jouni Malinen
    • [PATCH] P2P: Disconnect P2P group on supplicant deinit   nirav shah
    • [PATCH] P2P: Disconnect P2P group on supplicant deinit   Jouni Malinen
  • events not received on hostapd control event interface(Unix socket)   alfred steele
    • events not received on hostapd control event interface(Unix socket)   Bartosz.Markowski at tieto.com
      • events not received on hostapd control event interface(Unix socket)   alfred steele
• [PATCH] Add to bss command option RANGE=ALL|N1-N2 [MASK=0xH]   Dmitry Shmidt
  • hostapd with only virtual interfaces for BSSs possible?   David Martin
  • IBSS Association and authentication timeout   Anders Nilsson Plymoth
  • IBSS Association and authentication timeout   Anders Nilsson Plymoth
  • [PATCH] Fix double free in a wpa enterprise setup, after a client is connecting and hostapd can not reach radius server. It will double free while retransmitting the radius package.   Alexander Couzens
• How to determine if WEP association was successful (using CLI)?   Ed W
  • How to determine if WEP association was successful (using CLI)?   Jouni Malinen
    • [PATCH] Clean up: Replacing standard lib methods with os.h ones   nirav shah
    • [PATCH] Clean up: Replacing standard lib methods with os.h ones   Jouni Malinen
• non-HT bitrate after interface down   Genya
  • non-HT bitrate after interface down   Jouni Malinen
  • Doubts regarding implementing 802.11r   rupesh sanagapalli
• Config Methods for Probe Response   Takashi Kawamoto
  • Config Methods for Probe Response   Jouni Malinen
• Can we remove the eloop exception listener?   Ben Greear
  • [PATCH] eloop/poll: Handle POLLER | POLLHUP in read logic.   greearb at candelatech.com
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
  • Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Jouni Malinen
    • Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
      • Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Jouni Malinen
      • Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
      • Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Ed W

Last message date: Sat Mar 31 18:29:08 EDT 2012
Archived on: Sat Mar 31 18:29:21 EDT 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...