Slower internet speed via hostapd and TL-WN422G V2
mariusz.ciszewski at gmail.com
Mon Aug 11 17:04:50 EDT 2014
I just needed to make sure if it is not possible for hostapd to make any
speed reduction (maybe some WMM or other QoS options?). I just compared
internet speed in input and on output. In a some way from the 12Mbit/s on
the output of hostapd AP (on TL-WN422G V2) for the client is only 7,6
Maybe it is some driver issue. I will doublecheck it. Maybe I will try to
use other USB WiFi adapter.
2014-08-11 22:40 GMT+02:00 Jouni Malinen <j at w1.fi>:
> On Mon, Aug 11, 2014 at 11:43:53AM +0200, Mariusz Ciszewski wrote:
> > Using hostapd on device:
> > http://www.elektroda.pl/rtvforum/viewtopic.php?p=13479005 according to
> > http://osworld.pl/access-point-na-raspberry-pi/ I ran software Acces
> > But there is one issue. Slower internet speed via hostapd and TL-WN422G
> > Internet speed via calbe is 12 Mbit and via wici (hostapd) 7.6 Mbit only.
> hostapd does not process the Data frames and as such, this sounds like a
> driver question rather than something for this mailing list (unless the
> supported rates or channel parameters are misconfigured). Anyway, I'm
> not completely sure what you are comparing here. If that is really
> comparing the throughput through wired Ethernet and WLAN, it certainly
> doesn't have much to do with this mailing list or hostapd..
> Jouni Malinen PGP id EFC895FA
> HostAP mailing list
> HostAP at lists.shmoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the HostAP