EAPOL Key Timeout 1/4
Marc - A. Dahlhaus [ Administration | Westermann GmbH ]
mad at wol.de
Thu Oct 22 07:39:59 EDT 2009
Am Mittwoch, den 21.10.2009, 09:01 +0200 schrieb Daniel Rönnqvist:
> Hi again,
> when running hostapd (nl80211/bcm4306 on a ppc mac) with kernel 2.6.30
> it works kind of ok. One of my two laptops at home can connect and
> that's the one usually having better connection to any AP (stronger
> signal). The other one can connect but will get disconnected after a
> few minutes. Both are WinXP.
> When running with kernel 2.6.31 it wont work at all, the EAPOL keys
> are only rarely seen going out on wlan0 when I use tshark. If they go
> out they are answered by the client (verified with wireshark on
> client) but the response is never seen on the AP side. This was my
> problem when I first posted this issue.
i have the exact same problems with rt61pci (rt2x00) on i386 arch (32bit
PAE) and another user of rt61pci hit that problem also . I've tested
2.6.31.x and 2.6.32-rc4 kernels with no positive result. On kernels <
2.6.31 it works like a charm. I couldn't bisect it because i'm not that
familiar with git as of now.
It looks pretty much like a regression in the 2.6.31 development time
frame in mac80211 or cfg80211 on kernel side IMO if more than one driver
is actually affected by this misbehaviour.
If there is anything i can help with debugging on this problem, please
> With and 2.6.32-rc I get kernel scheduler errors in my dmesg and soon
> after starting to send traffic over the wlan the machine crashes, it's
> an RC after all.
> So going back to 2.6.30 kind of solves my problem, except for one of
> my XP machines but I can't really blame hostapd for that, can I? ;)
> Just thought I would let you know if there's anyone having the same problem.
> Den 15 oktober 2009 11.18 skrev Daniel R?nnqvist <kdronnqvist at gmail.com>:
> > 2009/10/14 Jouni Malinen <j at w1.fi>:
> >> On Wed, Oct 14, 2009 at 09:11:00AM +0200, Daniel R?nnqvist wrote:
> >>> * Is hostapd from git supposed to work with nl80211 (with a bcm4306 rev3)?
> >> I don't know about bcm4306, but at least the current snapshot of hostapd
> >> seems to be working fine with the ath9k driver.
> >>> * What does "deauthenticated due to local death" mean?
> >> It means that hostapd requested a station to be deauthenticated (in this
> >> case, I would assume it happened due to the WPA 4-way handshake timing
> >> out).
> >>> * The only messages i see with tshark during the authentication
> >>> process is "EAPOL Key" and some "LLC" messages coming from the client
> >>> MAC. The hostapd log says EAPOL Key Timeout on handshake 1/4. Is this
> >>> enough to guess what ballpark my problem is in?
> >> Have you verified that your client is receiving the EAPOL-Key message
> >> 1/4 and replying with 2/4?
> >> --
> >> Jouni Malinen PGP id EFC895FA
> > I see EAPOL key coming in on the client and it is answering to the
> > correct MAC address, but the AP is always just saying EAPOL key
> > timeout on 1/4. On the AP side i do "tshark -i wlan0" and see the
> > EAPOL key going out but nothing is coming back. However, I am reading
> > up on the subject because as of now I must admit that I do not know
> > how this works. I should be able to give a better description of my
> > problem in a week or so (after becoming junior guru of wifi) :) I did
> > get this setup to work before but after upgrading to Debian testing it
> > just wont.
> > BR,
> > Daniel
More information about the HostAP