LEAP support in Hostapd 0.9.5
Queenie de Melo
queenie245 at gmail.com
Thu Nov 20 03:56:13 EST 2008
> Hello Jouni,
> Appreciate all your help.
> The Clients we have tried are :
> DWL-AG132 H/W ver: B3 & F/W ver: 2.21
> DWL-G122 H/W ver: C1 & F/W ver: 3.00
> Configuration of Client is done via the D-Link Airpremier utility (on a
> system having Windows XP SP2)
> I am sending in two separate mails as attachament (due to 25Kb size
> contraints) -the setup and screen shots which will explain to you where/how
> we see LEAP.
> Looking forwad for your reply
> Thanks in advance!
> On Wed, Nov 19, 2008 at 6:15 PM, Jouni Malinen <j at w1.fi> wrote:
>> On Wed, Nov 19, 2008 at 09:14:24AM +0530, Queenie de Melo wrote:
>> > Could you advise why I could be getting Leap Option at my Client end
>> when I
>> > use the authenticator as hostapd and I dont get the option with the same
>> > client when I use a different authenticator(product DIR-655 - i dont
>> > internally which application acts like the authenticator)
>> I think that DIR-655 is using hostapd as the Authenticator..
>> > Is there a way to check this and make sure the Clients connected to my
>> AP in
>> > which hostapd is the authenticator does not get LEAP option at the
>> > end ( else that will confuse them as Actually as u mentioned LEAP option
>> > wont be present)
>> Authenticator does not really have much role in selecting which EAP
>> methods are available and I don't know how it could indicate to the
>> client that LEAP is not available as an option. Which client
>> implementation (including version) are you using?
>> Jouni Malinen PGP id EFC895FA
>> HostAP mailing list
>> HostAP at lists.shmoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the HostAP