WPA_CLI: Difficulty switching from 1connection to another
George S. Lockwood
gslockwood at gmail.com
Sat Aug 5 15:06:07 EDT 2006
I can get you a log and a list of commands, but not until Monday am Pacific
In the meantime, I just sent you a synopsis of what I'm wanting to achieve.
Perhaps you can add comments / correct my steps.
Or just provide the proper sequence of commands to accomplish my highlevel
goal (please see below).
My hopes are to send a series of commands to the supplicant in order to
connect to a number of different networks with a countless number of
identities and passwords (I'll take care of the other security variables
such as eap and phase, etc).
Hopefully this makes sense.
Tell you what, if you could send me the proper sequence of commands list.
I'll try it out to the 'T' and send you the log that comes from it (if
doesn't work). That way you are in charge and really know how to examine
the logged results.
as always thanks so much!!
On 8/5/06, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
> On Fri, Aug 04, 2006 at 07:40:49AM -0700, George S. Lockwood wrote:
> > 3. I can successfully enable on of the networks and get it to
> > connect. I believe I do the following:
> > 1. list the networks
> > 2. enable the one I want
> > 3. select the one I want (not sure the difference between enable
> > and select)
> > 4. reassociate.
> Enabling a network will only enable one of the networks without changing
> ocnfiguration for other networks. Selecting a network enables the
> selected network and disables all other networks.
> > 5. Trying to repeat the substeps of Step 3. to connect to a different
> > network (or the same again) doesn't establish the connection.
> Please send the full set of commands you tried and include description
> on which command did not work in the way you expected. I would also like
> to see the debug log from wpa_supplicant (with -dd on command line) for
> this case. It should be possible to use select_network to switch between
> configured networks and this should not require restarting of either
> wpa_supplicant or wpa_cli.
> Jouni Malinen PGP id EFC895FA
> HostAP mailing list
> HostAP at shmoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the HostAP