Nokia C110\C111

[Nevyn]

If I were to add an entry in hostap_cs.conf, what would I need to add? The 
output of cardctrl (very roughly and off memory) was something along the 
lines of:

"Nokia" "C110/C111 Wireless Network Card"
"0x0whatever" "0x0whatever"

I had a look at the hostap_cs.conf file and found that it needs name, 
version and those hex addresses. 

On 6/1/05, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
> 
> On Tue, May 31, 2005 at 02:29:59PM +0200, Henrik Brix Andersen wrote:
> > On Wed, 2005-06-01 at 00:00 +1200, Nevyn wrote:
> > > I'm desperately trying to get the Nokia C110/C111 PCMCIA card going.
> >
> > Those card are prism2/2.5/3 based according to
> > http://www.linux-wlan.org/docs/wlan_adapters.html.gz - so they ought to
> > work with the hostap-driver.
> 
> No, they are not. They do use Intersil chips, but the MAC is not the
> standard HFA3842 used in Prism2 series, but HFA3845 (if I remember
> correctly) which seems to have a completely different interface to the
> host system and as such, the driver is different and there's not much
> hope getting these to work with the Host AP driver.
> 
> --
> Jouni Malinen PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050601/ca6b176e/attachment.htm