madwifi+hostapd

and hansen and0806 at yahoo.dk
Mon Jun 6 07:01:01 EDT 2005


--- Jouni Malinen wrote:

> On Tue, May 31, 2005 at 04:42:54PM +0200, and hansen
> wrote:
> 
> > There is a very big output file at this website
> > http://www.nethost.dk/debug_dump.txt
> 
> You are configuring the AP to use bridging, i.e.,
> ath0 is in a bridge.
> However, your hostapd.conf is not configured for
> this. You will need to
> add bridge=br0 line into hostapd.conf in this kind
> of network
> configuration.
> 
> -- 
> Jouni Malinen
                                       
Perfekt i got my home brew wpa ap to work
please put a statement in the default hostapd.conf
about bridge=br0 incase of bridge

-------------------------------------
# AP netdevice name (without 'ap' prefix, i.e., wlan0
uses wlan0ap for
# management frames)
interface=wlan0

# If a bridge i used via bridge-utils (br0 in this
case) 
#bridge=br0
--------------------------------------

and thank you for this quality GPL software.

Best Regards
Lasse Jensen




More information about the HostAP mailing list