wpa_supplicant problems with authentication

段宁 duanng88 at yahoo.com.cn
Tue Jul 5 22:16:06 EDT 2005


Hi,
It seems that my wpa_supplicant has been authenticated successful by Radius ,but there is an timeout error in supplicant.And I cannot connect to the server ,why ?
the debug message is as follow:
...
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=13 id=5
EAP: EAP entering state METHOD
EAP-TLS: Received packet(len=69) - Flags 0x80
EAP-TLS: TLS Message Length: 59
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read finished A
SSL: (where=0x20 ret=0x1)
SSL: (where=0x1002 ret=0x1)
SSL: 0 bytes pending from ssl_out
SSL: No data to be sent out
EAP-TLS: Done
EAP-TLS: Derived key - hexdump(len=64): [REMOVED]
SSL: Building ACK
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 73, expecting at least 99
GHJ RF Hexdump : (num=013) 00 60 b3 64 c3 a6 00 60 b3 64 c3 2d 88 8e 
RX EAPOL from 00:60:b3:64:c3:2d
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Success
EAP: AS used the same Id again, but EAP packets were not identical
EAP: workaround - assume this is not a duplicate packet
EAP: EAP entering state SUCCESS
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_BE entering state IDLE
WPA: EAPOL frame too short, len 8, expecting at least 99
RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Authentication with 00:60:b3:64:c3:2d timed out.
Added BSSID 00:60:b3:64:c3:2d into blacklist
wpa_driver_hostap_disassociate
wpa_driver_hostap_reset: type=2
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
...


		
---------------------------------
DO YOU YAHOO!?
  雅虎免费G邮箱-中国第一绝无垃圾邮件骚扰超大邮箱 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050706/7999fe94/attachment.htm 


More information about the HostAP mailing list