<DIV>
<DIV>Hi,</DIV>
<DIV>It seems that my wpa_supplicant has been authenticated successful by Radius ,but there is an timeout error in supplicant.And I cannot connect to the server ,why ?</DIV>
<DIV>the debug message is as follow:</DIV>
<DIV>...</DIV>
<DIV>EAPOL: Received EAP-Packet frame<BR>EAPOL: SUPP_BE entering state REQUEST<BR>EAPOL: getSuppRsp<BR>EAP: EAP entering state RECEIVED<BR>EAP: Received EAP-Request method=13 id=5<BR>EAP: EAP entering state METHOD<BR>EAP-TLS: Received packet(len=69) - Flags 0x80<BR>EAP-TLS: TLS Message Length: 59<BR>SSL: (where=0x1001 ret=0x1)<BR>SSL: SSL_connect:SSLv3 read finished A<BR>SSL: (where=0x20 ret=0x1)<BR>SSL: (where=0x1002 ret=0x1)<BR>SSL: 0 bytes pending from ssl_out<BR>SSL: No data to be sent out<BR>EAP-TLS: Done<BR>EAP-TLS: Derived key - hexdump(len=64): [REMOVED]<BR>SSL: Building ACK<BR>EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC<BR>EAP: EAP entering state SEND_RESPONSE<BR>EAP: EAP entering state IDLE<BR>EAPOL: SUPP_BE entering state RESPONSE<BR>EAPOL: txSuppRsp<BR>EAPOL: SUPP_BE entering state RECEIVE<BR>WPA: EAPOL frame too short, len 73, expecting at least 99<BR>GHJ RF Hexdump : (num=013) 00 60 b3 64 c3 a6 00 60 b3 64 c3 2d 88 8e <BR>RX EAPOL from
00:60:b3:64:c3:2d<BR>EAPOL: Received EAP-Packet frame<BR>EAPOL: SUPP_BE entering state REQUEST<BR>EAPOL: getSuppRsp<BR>EAP: EAP entering state RECEIVED<BR>EAP: Received EAP-Success<BR>EAP: AS used the same Id again, but EAP packets were not identical<BR>EAP: workaround - assume this is not a duplicate packet<BR>EAP: EAP entering state SUCCESS<BR>EAPOL: SUPP_BE entering state RECEIVE<BR>EAPOL: SUPP_BE entering state SUCCESS<BR>EAPOL: SUPP_BE entering state IDLE<BR>WPA: EAPOL frame too short, len 8, expecting at least 99<BR>RTM_NEWLINK, IFLA_IFNAME: Interface 'wifi0' added<BR>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added<BR>Authentication with 00:60:b3:64:c3:2d timed out.<BR>Added BSSID 00:60:b3:64:c3:2d into blacklist<BR>wpa_driver_hostap_disassociate<BR>wpa_driver_hostap_reset: type=2<BR>No keys have been configured - skip key clearing<BR>EAPOL: External notification - portEnabled=0<BR>EAPOL: SUPP_PAE entering state DISCONNECTED<BR>EAPOL: SUPP_BE entering state
INITIALIZE<BR>EAP: EAP entering state DISABLED<BR>EAPOL: External notification - portValid=0</DIV>
<DIV>...</DIV></DIV><p>
<hr size=1>DO YOU YAHOO!?<br>
<a href="http://cn.mail.yahoo.com/?id=77071" target=blank>
雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱</a>