changing PDA doesn't work

Henrik Brix Andersen brix at gentoo.org
Sat Aug 27 06:40:37 EDT 2005


On Thu, 2005-08-25 at 07:06 +0100, Max Grabert wrote:
> I followed the description how to proceed precisely, and as I also
> use the same firmware there is basically no difference in the
> commands being used.

I've just tested this procedure on my prism2.5 based card using firmware
version 1.7.4 - works like it should here.

This is the changes I've made to the PDA to allow running my AP on
channel 13:

--- pda.backup  2005-08-16 22:16:44.000000000 +0200
+++ pda.ETSI    2005-08-16 22:41:16.000000000 +0200
@@ -21,10 +21,10 @@
 0200 376f 68fc
 ; PDR 0x0103 data len=12 Regulatory Domain List
 7 0103
-0002 2010 0000 0000 0000 0000
+0002 2030 0000 0000 0000 0000
 ; PDR 0x0104 data len=2 Allowed Channel Set/Active Channel List
 2 0104
-07ff
+1fff
 ; PDR 0x0105 data len=2 Default Channel
 2 0105
 0003

Perhaps try posting the exact commands you're using?

Regards,
Brix
-- 
Henrik Brix Andersen <brix at gentoo.org>
Gentoo Metadistribution | Mobile computing herd
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20050827/71a489ce/attachment.pgp 


More information about the HostAP mailing list