insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.

Yong Chu Eu (Ñî×ÓÓÓ) ceyong at yahoo.com
Tue Oct 19 03:42:37 EDT 2004


anyone know how to fix it?

[root at localhost root]# modprobe hostap_plx
/lib/modules/2.4.26/net/hostap_plx.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.26/net/hostap_plx.o: insmod
/lib/modules/2.4.26/net/hostap_plx.o failed
/lib/modules/2.4.26/net/hostap_plx.o: insmod hostap_plx failed


hostap_crypt: registered algorithm 'NULL'
hostap_plx: 0.1.3 - 2004-02-08 (Jouni Malinen <jkmaline at cc.hut.fi>)
PCI: Found IRQ 5 for device 02:01.0
PLX9052 PCI/PCMCIA adapter: mem=0xd4000000, plx_io=0xc000, irq=5,
pccard_io=0xc400
hostap_plx: CIS: 01 03 00 00 ff 17 ...
hostap_plx: manfid=0x0101, 0x0777
hostap_plx: cor_index=0x1 cor_offset=0x3e0
Prism2/2.5 PC Card detected in PLX9052 adapter
PLX_INTCSR=0x1063
PLX_CNTRL=0x180066d2 (Serial EEPROM present=1)
divert: allocating divert_blk for wlan0
mip6[ma_ctl_upd_iface]: multiaccess_ctl.c(193)/ma_ctl_upd_iface:
hostap_plx: Registered netdevice wlan0
prism2_hw_init: initialized in 100 ms
wlan0: trying to read PDA from 0x007f0000: failed
wlan0: trying to read PDA from 0x003f0000: failed
wlan0: trying to read PDA from 0x00390000: OK
wlan0: NIC: id=0x8002 v1.0.0
wlan0: PRI: id=0x15 v0.3.0
wlan0: STA: id=0x1f v0.8.3
wlan0: defaulting to host-based encryption as a workaround for firmware
bug in Host AP mode WEP
wlan0: defaulting to bogus WDS frame as a workaround for firmware bug in
Host AP mode WDS
wlan0: Setting ALC to 0
wlan0: Setting TX power to 127

wlan0: hfa384x_cmd: entry still in list? (entry=c9106980, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c9106980,
type=0, cmd=0x0001, param0=0x0000, EVSTAT=0000 INTEN=0010)
wlan0: MAC port 0 enabling failed
hostap_plx: hardware initialization failed
mip6[ma_ctl_upd_iface]: multiaccess_ctl.c(193)/ma_ctl_upd_iface:
divert: freeing divert_blk for wlan0
hostap_plx: No devices found, driver not installed.
hostap_crypt: unregistered algorithm 'NULL' (deinit)


=====
Ô¸ÄúÓÀÔ¶ÐÒ¸££¬¿ìÀֺͰ²Ïê Happy & Healthy Always ! ^_^ !
¸öÈËÍøÒ³ Homepage:http://planet.time.net.my/sunwaycity/ceyong
¸öÈË·ðѧÍøÒ³ Buddhist Page: http://planet.time.net.my/SunwayCity/ceyong/artikel.htm
ICQ:16994867/ Yahoo Messenger ID:ceyong /MSN Messenger:ceyong at hotmail.com


		
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com



More information about the HostAP mailing list