problem with madwifi drivers

Oscar p reeopp at hotmail.com
Fri Nov 26 07:33:17 EST 2004


Hi YenJung
This is what I get:
dhcppc0:/ # insmod /home/oscar/madwifi/madwifi-20041021/net80211/wlan_tkip.o
insmod: error inserting 
'/home/oscar/madwifi/madwifi-20041021/net80211/wlan_tkip.o': -1 Unknown 
symbol in module

Thanks once more!!!!
Oscar

>From: YenJung Chang <yenjung at gmail.com>
>Reply-To: YenJung Chang <yenjung at gmail.com>
>To: Oscar p <reeopp at hotmail.com>
>CC: hostap at shmoo.com
>Subject: Re: problem with madwifi drivers
>Date: Fri, 26 Nov 2004 20:29:02 +0800
>
>If you compiled madwifi as kernel module, the modules with prefixed
>"wlan_" were in
>directory "madwifi/net80211".  You can command as:
>
>insmod ${madwifi}/net80211/wlan_tkip.o
>
>please replace the ${madwifi} with the actual path of madwifi in your 
>machine.
>
>
>If you compiled madwifi within kernel image, there is no madwifi
>modules needed to insert.
>
>yj.
>
>On Fri, 26 Nov 2004 12:32:27 +0100, Oscar p <reeopp at hotmail.com> wrote:
> >
> > Hi YenJung
> >
> > Sorry but where shall I insert them?
> >
> > BR/ Oscar
> >
> > >From: YenJung Chang <yenjung at gmail.com>
> > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > >To: pepe perez <reeopp at hotmail.com>
> > >CC: hostap at shmoo.com
> > >Subject: Re: problem with madwifi drivers
> > >Date: Fri, 26 Nov 2004 17:12:44 +0800
> >
> >
> > >
> > >OK....
> > >I guess you just inserted wlan.o, ath_hal.o and ath_pci.o modules, 
>right?
> > >
> > >Please also insert wlan_wep.o wlan_tkip.o and wlan_ccmp.o, those are
> > >all in net80211 directory.
> > >
> > >yj.
> > >
> > >
> > >On Thu, 25 Nov 2004 15:21:46 +0100, pepe perez <reeopp at hotmail.com> 
>wrote:
> > > > Hi YenJung!
> > > > I think I already tried it, anyway I have just tried again and not 
>so
> > >much
> > > > difference:
> > > >
> > > > dhcppc0:~ # wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
> > > > Configuration file '/etc/wpa_supplicant.conf' ->
> > >'/etc/wpa_supplicant.conf'
> > > > Reading configuration file '/etc/wpa_supplicant.conf'
> > > > ctrl_interface='/var/run/wpa_supplicant'
> > > > ctrl_interface_group=0
> > > > eapol_version=1
> > > > ap_scan=1
> > > > Priority group 1
> > > >    id=0 ssid='OSCARLAN'
> > > > Using existing control interface directory.
> > > > EAPOL: SUPP_PAE entering state DISCONNECTED
> > > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> > > > EAPOL: SUPP_BE entering state INITIALIZE
> > > > EAP: EAP entering state DISABLED
> > > > EAPOL: External notification - portEnabled=0
> > > > EAPOL: External notification - portValid=0
> > > > wpa_driver_madwifi_set_wpa: enabled=1
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > Failed to enable WPA in the driver.
> > > > wpa_driver_madwifi_set_wpa: enabled=0
> > > > ioctl[IEEE80211_IOCTL_SETOPTIE]: Operation not supported
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > Failed to disable WPA in the driver.
> > > > wpa_driver_madwifi_set_drop_unencrypted: enabled=0
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > wpa_driver_madwifi_set_countermeasures: enabled=0
> > > > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
> > > > Control interface directory not empty - leaving it behind
> > > >
> > > > It looks like something else is going on, meybe in configuration or
> > > > compilation....
> > > >
> > > > Thanks a lot for your help!!!
> > > > Oscar
> > > >
> > > > >From: YenJung Chang <yenjung at gmail.com>
> > > > >Reply-To: YenJung Chang <yenjung at gmail.com>
> > > > >To: pepe perez <reeopp at hotmail.com>
> > > > >CC: hostap at shmoo.com
> > > > >Subject: Re: problem with madwifi drivers
> > > > >Date: Thu, 25 Nov 2004 21:20:22 +0800
> > > > >
> > > > >AFAIK, the interface name of madwifi is "ath0", hence, the 
>interface
> > > > >in your command should be -iath0, not -iwlan0.
> > > > >
> > > > >yj.
> > > > >
> > > > >
> > > > >
> > > >
> > > > _________________________________________________________________
> > > > Don't just search. Find. Check out the new MSN Search!
> > > > http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> > > >
> > > >
> >
> > _________________________________________________________________
> > Express yourself instantly with MSN Messenger! Download today it's FREE!
> > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> >
> >

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.com/




More information about the HostAP mailing list