problem with madwifi drivers

Oscar p reeopp at hotmail.com
Fri Nov 26 07:30:47 EST 2004


Sorry YenJung

I mean, they already are under

usr/src/madwifi/net80211

is that enough?

Thanks!
Oscar

>From: "Oscar p" <reeopp at hotmail.com>
>To: yenjung at gmail.com
>CC: hostap at shmoo.com
>Subject: Re: problem with madwifi drivers
>Date: Fri, 26 Nov 2004 12:32:27 +0100
>
>
>Hi YenJung
>
>Sorry but where shall I insert them?
>
>BR/ Oscar
>
>>From: YenJung Chang <yenjung at gmail.com>
>>Reply-To: YenJung Chang <yenjung at gmail.com>
>>To: pepe perez <reeopp at hotmail.com>
>>CC: hostap at shmoo.com
>>Subject: Re: problem with madwifi drivers
>>Date: Fri, 26 Nov 2004 17:12:44 +0800
>>
>>OK....
>>I guess you just inserted wlan.o, ath_hal.o and ath_pci.o modules, right?
>>
>>Please also insert wlan_wep.o wlan_tkip.o and wlan_ccmp.o, those are
>>all in net80211 directory.
>>
>>yj.
>>
>>
>>On Thu, 25 Nov 2004 15:21:46 +0100, pepe perez <reeopp at hotmail.com> wrote:
>> > Hi YenJung!
>> > I think I already tried it, anyway I have just tried again and not so 
>>much
>> > difference:
>> >
>> > dhcppc0:~ # wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
>> > Configuration file '/etc/wpa_supplicant.conf' -> 
>>'/etc/wpa_supplicant.conf'
>> > Reading configuration file '/etc/wpa_supplicant.conf'
>> > ctrl_interface='/var/run/wpa_supplicant'
>> > ctrl_interface_group=0
>> > eapol_version=1
>> > ap_scan=1
>> > Priority group 1
>> >    id=0 ssid='OSCARLAN'
>> > Using existing control interface directory.
>> > EAPOL: SUPP_PAE entering state DISCONNECTED
>> > EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>> > EAPOL: SUPP_BE entering state INITIALIZE
>> > EAP: EAP entering state DISABLED
>> > EAPOL: External notification - portEnabled=0
>> > EAPOL: External notification - portValid=0
>> > wpa_driver_madwifi_set_wpa: enabled=1
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > Failed to enable WPA in the driver.
>> > wpa_driver_madwifi_set_wpa: enabled=0
>> > ioctl[IEEE80211_IOCTL_SETOPTIE]: Operation not supported
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > Failed to disable WPA in the driver.
>> > wpa_driver_madwifi_set_drop_unencrypted: enabled=0
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > wpa_driver_madwifi_set_countermeasures: enabled=0
>> > ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
>> > Control interface directory not empty - leaving it behind
>> >
>> > It looks like something else is going on, meybe in configuration or
>> > compilation....
>> >
>> > Thanks a lot for your help!!!
>> > Oscar
>> >
>> > >From: YenJung Chang <yenjung at gmail.com>
>> > >Reply-To: YenJung Chang <yenjung at gmail.com>
>> > >To: pepe perez <reeopp at hotmail.com>
>> > >CC: hostap at shmoo.com
>> > >Subject: Re: problem with madwifi drivers
>> > >Date: Thu, 25 Nov 2004 21:20:22 +0800
>> > >
>> > >AFAIK, the interface name of madwifi is "ath0", hence, the interface
>> > >in your command should be -iath0, not -iwlan0.
>> > >
>> > >yj.
>> > >
>> > >
>> > >
>> >
>> > _________________________________________________________________
>> > Don't just search. Find. Check out the new MSN Search!
>> > http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>> >
>> >
>

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/




More information about the HostAP mailing list