Netgear MA401 Problem

[Gerald Rogers]

Hello,

I'm having problem getting a Netgear MA401 to work.  I
have the following setup:

Linux version 2.4.23

PCMCIA Drivers version 3.2.4

Wireless tools v26

Latest released Host AP tools

Message printed to screen during cardctl insert:

cardmgr[167]: executing: 'insmod /lib/modulhostap_cs:
index 0x01: Vcc 5.0es/2.4.
18/pcmcia, irq 7/hostap_cs.o'
, io 0x0a00-0x0a3f
hostap_cs: Registered netdevice wlan0
wlan0: NIC: id=0x8002 v1.0.0
wlan0: PRI: id=0x15 v0.3.0
wlan0: STA: id=0x1f v0.8.3
wlan0: MAC port 0 enabling failed

Here is the dmesg dump of the problem:

cardmgr[167]: executing: './network start wlan0'
dmesg
hostap_cs: 0.1.3 - 2004-02-08 (Jouni Malinen
<jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 5.0, irq 7, io
0x0a00-0x0a3f
hostap_cs: Registered netdevice wlan0
prism2_hw_init: initialized in 170 ms
wlan0: NIC: id=0x8002 v1.0.0
wlan0: PRI: id=0x15 v0.3.0
wlan0: STA: id=0x1f v0.8.3
wlan0: defaulting to host-based encryption as a
workaround for firmware bug in H
ost AP mode WEP
wlan0: defaulting to bogus WDS frame as a workaround
for firmware bug in Host AP
 mode WDS
wlan0: hfa384x_cmd: entry still in list?
(entry=c113ff90, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0,
entry=c113ff90, type=0, cm
d=0x0001, param0=0x0000, EVSTAT=0000 INTEN=0010)
wlan0: MAC port 0 enabling failed

Dump of cardctl ident and cardctl info

cardctl ident:

Socket 0:
  product info: "NETGEAR MA401 Wireless PC", "Card",
"Version 01.00", ""
  manfid: 0x0156, 0x0002
  function: 6 (network)

cardctl info:

PRODID_1="NETGEAR MA401 Wireless PC"
PRODID_2="Card"
PRODID_3="Version 01.00"
PRODID_4=""
MANFID=0156,0002
FUNCID=6

Anytime I perform an operation with iwconfig, I get
the following error printed in dmesg:

wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed
(res=-110, rid=fc83, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000
usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8001
wlan0: hfa384x_cmd: entry still in list?
(entry=c113fed0, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed
(res=-110, rid=fc82, len=2)

Any help is greatly appreciated.

Thanks,

Gerald Rogers


		
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail