Questions about DLink card
creye004 at pinhue.ufro.cl
Thu Jul 1 21:05:20 EDT 2004
May be it's the same that happen to me with the Rev. B1 .
My problem was that the primary firmware of the card was too old and that
there was no station firmware.
So, I flashed the card with PRI 1.1.1 and STA 1.8.0 following the
instructions in http://linux.junsun.net/intersil-prism/ (I used the
prism2_srec in linux to load the firmwares).
Then I tried again and now it's working great.
I never heard about a Rev. P1, but if it is a Prism2.5 card it may be work.
PS: who help me the most was "AP-Research" and the subject of the e-mail
was "Help configuring DWL-520 Rev.B1"
At 20:43 01-07-2004, T.J. Kniveton wrote:
>Hi folks, I am new to the list, and wanted to ask a question.. first off,
>thanks to Jouni Malinen for making this driver.
>I am testing with a Prism2.5 card, the SMC2532W-B (which shows up in the
>system log as a Zcomax XI-325H 200mW), and also want to try the D-Link
>DWL-650, rev P1.
>With the D-link, when I insert the card, the sys log shows that it was
>recognized as the proper card, and the HostAP driver is activated.
>However; when I issue a "ifconfig wlan0 up", it fails to bring the
>interface up. Any successive iwconfig commands fail.
>Is this a known problem? I couldn't find the answer by doing a search...
>HostAP mailing list
>HostAP at shmoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the HostAP