Problem with driver on Ipaq

Daniele Brevi danibrevi at libero.it
Mon Jan 26 04:42:24 EST 2004


Hi at all,  

I'm tryng to work with a PCMCIA Netgear MA401 on an Ipaq 3600 (with
linux for arm www.handhelds.org).
The problem is that when I insert the card the drivers are loaded but I
can't see wlan0 (and any other wireless interface)
I provided the dmsg's log.
I have also try to remove (rmmod) manually and reinstall (modprobe) the
driver, but he doesn't work.

Can someone help me?

Thanks in advance

Daniele Brevi



Linux Kernel Card Services 3.1.22
  options:  [pm]
<6>SA-1100 PCMCIA (CS release 3.1.22)
installing h3600_pcmcia_ops
sa1100_pcmcia_driver_init: pcmcia_low_level=cab02a3c
sa1100_pcmcia_driver_init: skt=0 skt->virt_io=cab10000
sa1100_pcmcia_driver_init: skt=1 skt->virt_io=cab30000
sa1100_pcmcia_driver_init: done
Serial driver version 5.05c (2001-07-08) with no serial options enabled
dma period = 1398056 ps, clock = 206400 kHz
dma period = 1398056 ps, clock = 206400 kHz
dma period = 1398056 ps, clock = 206400 kHz
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.0.4 - 2003-07-27 (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: ignoring Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
: Interrupt, but dev not OK
hostap_cs: index 0x01: Vcc 5.0, irq 32, io 0xcab30000-0xcab3003f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
hostap_cs: card initialization timed out
prism2: wlan0: operating mode changed 3 -> 1




More information about the HostAP mailing list