(almost working!) Problems with wpa_supplicant and Linksys WPC54G + WPA EAP-TTLS
dparsons at pioneer-pra.com
Mon Dec 20 18:18:39 EST 2004
Nevermind, I made it work! The last trick was making phase2 have just
Pioneer Research Center USA, Inc.
On Dec 20, 2004, at 3:02 PM, Dan Parsons wrote:
> Okay, I have made progress! It is now working to the point that my
> radius server is receiving packets from the access point I'm trying to
> connect to... the only problem is that it's not sending a password!
> Mon Dec 20 15:00:45 2004 : Auth: Login incorrect: [prauser/<no
> User-Password attribute>] (from client aironet1-oc port 273 cli
> My wpa_supplicant.conf file looks like the below. What am I doing
> phase2="autheap=PAP autheap=MD5"
> Dan Parsons
> Systems Administrator
> Pioneer Research Center USA, Inc.
> On Dec 20, 2004, at 1:32 PM, Dan Parsons wrote:
>> Very interesting indeed... would you mind showing me what your
>> wpa_supplicant.conf file looks like? Also, maybe a link to the .zip
>> or .exe of the Windows drivers you're using?
>> Dan Parsons
>> Systems Administrator
>> Pioneer Research Center USA, Inc.
>> On Dec 20, 2004, at 1:30 PM, Stephen Mathezer wrote:
>>> Dan Parsons wrote:
>>>> While I'm waiting for the ndiswrapper folk to get back to me, I
>>>> decided to get LinuxAnt's DriverLoader a try instead of
>>>> ndiswrapper. So far I haven't had any system crashes, which is
>>>> great. However WPA+EAP-TTLS still isn't working. Below is some
>>>> debugging information for you... does it look like the same issue
>>>> as what I'm having with ndiswrapper? I'm using the same Windows
>>>> drivers with it as I was with ndiswrapper and also the same card.
>>>> I thank you in advance for any information you can give me.
>>> I realize that I am talking TLS whereas you are talking TTLS, but
>>> for what it is worth, I have a WPC54GV4 and have had the following
>>> -EAP-TLS works fine under Windows XP
>>> -EAP-TLS works fine with DriverLoader
>>> -EAP-TLS fails with ndiswrapper and wpa_supplicant 0.2.5. As of
>>> Ndiswrapper 0.12 I could actually see a conversation with the radius
>>> server, which was new, but I still couldn't complete authentication.
>>> -An identical wpa_supplicant config works fine with the native
>>> Madwifi drivers with my Dlink-650G
>>> I haven't had time (or inclination) to dig too much since I do have
>>> one working card. It is interesting however that DriverLoader worked
>>> for me but not for you.
>> HostAP mailing list
>> HostAP at shmoo.com
More information about the HostAP