(new info) Problems with wpa_supplicant and Linksys WPC54G + WPA EAP-TTLS
mathezer at yahoo.com
Mon Dec 20 16:50:12 EST 2004
Sure. My wpa_supplicant.conf is pretty vanilla:
This is the driver that I used both with Ndiswrapper and DriverLoader.
# ls -al /etc/ndiswrapper/wlipnds/
drwxr-xr-x 2 root root 4096 Nov 5 15:53 ./
drwxr-xr-x 3 root root 4096 Nov 5 15:53 ../
lrwxrwxrwx 1 root root 49 Nov 5 15:53 17FE:2220.conf ->
-rw-r--r-- 1 root root 220 Nov 5 15:53 17FE:2220:1737:0029.conf
-rw-r--r-- 1 root root 117248 Nov 5 15:53 i2220ntx.sys
-r--r--r-- 1 root root 13067 Nov 5 15:53 wlipnds.inf
My eap.conf from FreeRadius is:
Hope that helps
Oh yeah, I forgot to mention previously, EAP-PSK also works fine with
Ndiswrapper. It was only TLS that gave me grief.
Dan Parsons wrote:
> Very interesting indeed... would you mind showing me what your
> wpa_supplicant.conf file looks like? Also, maybe a link to the .zip or
> .exe of the Windows drivers you're using?
> Dan Parsons
> Systems Administrator
> Pioneer Research Center USA, Inc.
> On Dec 20, 2004, at 1:30 PM, Stephen Mathezer wrote:
>> Dan Parsons wrote:
>>> While I'm waiting for the ndiswrapper folk to get back to me, I
>>> decided to get LinuxAnt's DriverLoader a try instead of ndiswrapper.
>>> So far I haven't had any system crashes, which is great. However
>>> WPA+EAP-TTLS still isn't working. Below is some debugging
>>> information for you... does it look like the same issue as what I'm
>>> having with ndiswrapper? I'm using the same Windows drivers with it
>>> as I was with ndiswrapper and also the same card.
>>> I thank you in advance for any information you can give me.
>> I realize that I am talking TLS whereas you are talking TTLS, but for
>> what it is worth, I have a WPC54GV4 and have had the following
>> -EAP-TLS works fine under Windows XP
>> -EAP-TLS works fine with DriverLoader
>> -EAP-TLS fails with ndiswrapper and wpa_supplicant 0.2.5. As of
>> Ndiswrapper 0.12 I could actually see a conversation with the radius
>> server, which was new, but I still couldn't complete authentication.
>> -An identical wpa_supplicant config works fine with the native
>> Madwifi drivers with my Dlink-650G
>> I haven't had time (or inclination) to dig too much since I do have
>> one working card. It is interesting however that DriverLoader worked
>> for me but not for you.
More information about the HostAP