Is it possible?
amiandrew at volny.cz
Thu Aug 26 13:13:37 EDT 2004
Piotr Dąbrowski wrote:
> I am using HostAP form about 2 years (and thanks for Jouni for his very
> impressive work)
> with 8 connected wireless clients. It works great! But now I want to connect
> few clients trough DLink DWL-900AP+ (there is no other way).
> DWL-900AP+ is in "AP Client Mode" and it can connect to Host AP. I can ping
> the LAN address of the DWL-900AP+ from the Linux box. I have also three PC's connected to
> the LAN port of the DWL-900AP+ (over Ethernet) and they can ping the LAN address of the
> DWL-900AP+ also.
> But that is all. :(
> From Linux box I cannot ping the PC's that are attached to the LAN interface
> of the DWL-900AP+, and from PC's I cannot ping the Linux box with Host AP.
> Am I doing some mistake or it cannot work this way?
> I know, that if DWL-900AP+ is on both sides (one act as AP, and one as AP
> Client) it works well.
I used the DLink DWL900AP+ for connection to ZComm Xi626 card with hostap v0.2.4 and all works great. Now, I have installed the DWL900AP+ revC as AP and DWL900AP+ revB as client and all works but I must install the fw3.07b2 (pre 3.10). Without this fw I cannot associate to this AP.
If you use the revB, I think, there are some limitation about number of connections on ethernet port. This limitation should not be in revC.
Can you be more spceific with your configuration? (revisions, firmwares, etc..)
Ondrej Zima <amiandrew at volny.cz>
Member of Czech ATO - Amiga Translators Organization
More information about the HostAP