still problems getting hostap working

[David Cougle]

here's what dmesg says

(i changed code to use eth instead of wlan)
please help?
cat hostaperror.txt
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.0.2 - 2003-05-03 (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f
cs: IO port probe 0x0380-0x03af: clean.
cs: IO port probe 0x03bc-0x04ff: excluding 0x3bc-0x3db
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
hostap_cs: index 0x01: Vcc 5.0, irq 7, io 0x0100-0x013f
hostap_cs: Registered netdevice eth2
prism2_hw_init()
prism2_hw_config: initialized in 9476 iterations
eth2: NIC: id=0x8002 v1.0.0
eth2: PRI: id=0x15 v0.3.0
eth2: STA: id=0x1f v0.8.0
eth2: defaulting to host-based encryption as a workaround for firmware bug 
in Ho
st AP mode WEP
eth2: defaulting to bogus WDS frame as a workaround for firmware bug in Host 
AP
mode WDS
Using data::nullfunc ACK workaround - firmware upgrade recommended
eth2: Host AP mode does not support 'Any' essid
eth2: prism2_open
eth2 unsupported ioctl(0x8947)
eth2 unsupported ioctl(0x8946)
eth2 unsupported ioctl(0x8946)
eth2 unsupported ioctl(0x8946)
eth2 unsupported ioctl(0x8946)

_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online  
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963