Senao SL-2511CD Ext2

Alberto Malvido amalvido#miranda at pasarela.tsc.uvigo.es
Thu Jun 19 09:47:27 EDT 2003


Thanks to all for your responses.

Yang-Hwee, I used yor How-To, and I compiled and installed hostap without error. But when I init Debian, there are errors like these:

PCI:Enabling device 00:09:0 (0000->0002)
PCI:No Irq know for interrrupt pin A of device 00:09:0. Probably buggy MP table.
Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:09, mem 0x100000
host opts [0]:[isa irq] [10 3/6/1] [no pci irq] [lat 168/176] [bus 2/5]
ISA irqs(default)= 3,4,7,9,10,11 polling interval=100ms.
pasport 0:PC-style at 0x378 (0x778) [PCSPP, TRISTATE, EPP]
parport: irq 7 detected
lp0: using parport0 (polling)
cs:memory probe 0xa0000000-0xa0ffffff:clean

hostap-crypt:registered algorithm 'NULL'
hostap_cs:hostap_cs 0.0.0 2002-10-12 (SSH Comunications Security Corp, Jouni Malinen)
hostap_cs: (c) Jouni Malinen <jkmaline at cc.hut.fi>
hostap_cs:CardServices release does not match!
hostap_crypt:registered algorithm 'NULL' (deinit)


I wrote next lines in hostap_cs.conf
	card "Senao SL-2511CD/SL-2511CDPLUS/SL-2511CDPLUSEXT2"
		version "INTERSIL", "HFA384x/IEEE", "Version 01.02"
		bind "hostap_cs"
It`s this right?.

I compiled Kernell with next issues:

[*] Prompt for development and/or incomplete code/drivers
[ ] PCMCIA/Cardbus
[*] Enable loadable module support
[*] Set version information on all module symbols
[*] Kernel module loader
[*] 802.1d Ethernet Bridgind
[*] Wireless LAN (nom-hamradio)

Thanks you very much.


> use ...
> make pccard
> ref to my docs... http://pachome2.pacific.net.sg/~yanghwee/sub/How-To-wirelessAP.html
> i used the same card n pcmcia adapter too.
> disclaimer: my docs was written based on hostap(dated 2002-05-19).
> have fun!
> -yanghwee

On Wed, 18 Jun 2003 19:12:12 +0200
Alberto Malvido <amalvido#miranda at pasarela.tsc.uvigo.es> wrote:
> Hi all,
>
> I purchase one Senao SL-2511CD EXT2 802.11b card, and one PCI-PCMCIA RICOH adapter. I´m trying install hostap under Debian but i have some doubts.
>
> I don´t know the manfid of this card, the veersion and the others parameters that I must include in hostap_cs.conf file.
> Also, I don´t know how compile the driver:
> make pccard?
> make pci?
> make plx?
> I have a 2.4.18 kernel, do I need install pcmcia_cs or can I use the pcmcia already installed?.
>
> If somebady have one How-to to install this card under Debian I would be greatefull.
>
> Thank you Very Much.
>
>

-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/



More information about the HostAP mailing list