Fw: deauthentication: reason_code=3

wireless at douglasheld.net wireless at douglasheld.net
Sat Jan 4 00:26:24 EST 2003


Hello,

I am running hostap-2002-10-12 (the .plx driver) on a Red Hat 6.2 machine,
and I am investigating roaming with a laptop, where I come in and out of
range of the AP.

My AP consists of the plx card in the RedHat box, and a Dlink DWL 900-AP+
configured as a repeater of the plx radio.

What I find is that the card software on the laptop will happily state that
is is still associated (or RE-associated), and the LEDs show that it
associated.  However, no packets get through.

I find the following (or similar) in my messages file:  My question, I
guess, is where can I decode "reason_code=3", and can anyone guess a setting
I can use to instruct the AP to be agreeable when clients with bad
connections move to a better location?

Thanks, Jouni.
--Doug

Note: MAC 0090D1078103 is the radio in the RedHat box.
MAC 00:40:05:D0:4A:1A is the Dlink repeater AP
MAC 00:30:AB:14:0F:1C is the moving laptop.

wlan0: TXEXC - fid=0x041a - status=0x0001 ([RetryErr]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x0a08 (Data::0)
   addr1=00:30:ab:14:0f:1c addr2=00:90:d1:07:81:03 addr3=00:90:d1:07:81:03
wlan0: STA 00:30:ab:14:0f:1c TX rate lowered to 10
wlan0: sending disassociation info to STA 00:30:ab:14:0f:1c(last=390603,
jiffies=391703)
wlan0: TXEXC - fid=0x0228 - status=0x0001 ([RetryErr]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x08a0 (Mgmt::10)
   addr1=00:30:ab:14:0f:1c addr2=00:90:d1:07:81:03 addr3=00:90:d1:07:81:03
wlan0: sending deauthentication info to STA 00:30:ab:14:0f:1c(last=390603,
jiffies=391803)
wlan0: TXEXC - fid=0x0431 - status=0x0001 ([RetryErr]) tx_control=000c
   retry_count=0 tx_rate=0 fc=0x08c0 (Mgmt::12)
   addr1=00:30:ab:14:0f:1c addr2=00:90:d1:07:81:03 addr3=00:90:d1:07:81:03
Could not find STA for this TX error
wlan0: dropped received packet from non-associated STA 00:30:ab:14:0f:1c
(type=0x02, subtype=0x00)
handle_ap_item - data frame
wlan0: authentication: 00:30:ab:14:0f:1c len=6, auth_alg=0,
auth_transaction=1, status_code=0, fc=0x00b0
wlan0: new STA 00:30:ab:14:0f:1c
wlan0: association request: from 00:30:ab:14:0f:1c to 00:90:d1:07:81:03
len=30
  capability=0x0001, listen_interval=1 - new AID 2
wlan0: deauthentication: 00:30:ab:14:0f:1c len=2, reason_code=3
wlan0: deauthentication: 00:30:ab:14:0f:1c len=2, reason_code=3
wlan0: deauthentication: 00:30:ab:14:0f:1c len=2, reason_code=3
wlan0: deauthentication: 00:30:ab:14:0f:1c len=2, reason_code=3




More information about the HostAP mailing list