CVS -C switch
jkmaline at cc.hut.fi
Fri Jan 10 02:10:22 EST 2003
On Thu, Jan 09, 2003 at 08:45:53PM -1000, jbreeden at plumhall.com wrote:
> Everything goes great, fire off hostapd with -C set to the other
> ap's hdwr address and client logs in. shows up in other ap's
> As soon as I send the first data frame (ping), the client deauthenticates with
> a reason_code=3 and sure 'nuff, it disappears out of /proc.
hostapd is not sending deauth frames with reason_code=3 (deauth, STA
leaving), so this would need to come from firmware.. I did not actually
test this with another Host AP device, but with an SMC AP. I'll test
this with two hostapd's, but I would assume that this should not really
change things at all (unless that SMC AP is ignoring deauth frame; I did
not have sniffer running at the time, so I did not check whether there
were any unexpected management frames being sent).
Is the host that is running hostapd with -C option in Master mode? Does
it show anything strange in the hostapd debug?
Jouni Malinen PGP id EFC895FA
More information about the HostAP