[VPN] Problem in ipsec vpn setup.

[Virendra Yelurkar]

Hi all,

I am trying to setup a tunnel mode ipsec vpn connection between two
gateways. (196.1.109.54 <--> 196.1.109.71). Each of these gateways are
connected to a client using cross cables. The configuration is :



                               (10.1.1.234)             (196.1.109.54)
|
|  (196.1.109.71)                              (10.2.2.234)
client-1 -------------------------- Gateway-1=====| Router |=======
Gateway-2 -------------------------client-2
( 10.1.1.1 )   cross cable
|            |                                            cross
cable               ( 10.2.2.1 )

Routing table entries on Gateway-1 are:

eth0: default gw=Router
eth1 : default gw=10.1.1.1

Routing table entries on Gateway-2 are:

eth0: default gw=Router
eth1 : default gw=10.2.2.1

When I try to ping one client from another, following error occures:

sshipm: warning; SPD Phase-1 policy [responder]; Can not get policy
for ipv4(any:0,[0..3]=0.0.0.0) <-> ipv4(any:0,[0..3]=196.1.109.71)

sshipm: error; SPD rejected conn using selectors
unknown(any:0,[0..0]=)(ipv4(any:0,[0..3]=0.0.0.0)) <->
(ipv4(any:0,[0..3]=196.1.109.71))unknown(any:0,[0..0]=)
sshipm: info; The remote server 196.1.109.71:500 is SSH Communications
Security IPSEC Express version 5.0.0

Please help me in this regard..
Thanking you in anticipation.
-----------------------------------------------------------------------
Regards,

Virendra Yelurkar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/vpn/attachments/20060105/c4d194e3/attachment.htm