routing table on the client

[guy.raymakers at europe.eds.com]

Hi all,

When connecting the Nortel IPsec client to the CES over the Internet, we have
noticed that the management IP address of the CES is added in the routing table
of the client when the IPsec connection is established. Is there a way to get
the IP address out of the routing table ?

Here's an example output :

Active Routes:

  Network Address          Netmask  Gateway Address        Interface  Metric
          0.0.0.0          0.0.0.0     194.7.250.57     194.7.250.58       1
        127.0.0.0        255.0.0.0        127.0.0.1        127.0.0.1       1
     194.7.187.90  255.255.255.255     194.7.250.57     194.7.250.58       1
     194.7.250.56  255.255.255.252     194.7.250.58     194.7.250.58       1
     194.7.250.58  255.255.255.255        127.0.0.1        127.0.0.1       1
    194.7.250.255  255.255.255.255     194.7.250.58     194.7.250.58       1
   198.123.141.58  255.255.255.255   204.172.252.13   204.172.252.13       1
    204.172.252.0    255.255.255.0   204.172.252.13   204.172.252.13       1
    204.172.252.8  255.255.255.248   204.172.252.13   204.172.252.13       1
   204.172.252.13  255.255.255.255        127.0.0.1        127.0.0.1       1
        224.0.0.0        224.0.0.0     194.7.250.58     194.7.250.58       1
  255.255.255.255  255.255.255.255     194.7.250.58     194.7.250.58       1

198.123.141.58 = the management IP address.

Thanks,
Guy


****************************************************************
TO POST A MESSAGE on this list, send it to vpn at listserv.secnetgroup.com

The VPN FAQ (under construction) is available at
http://kubarb.phsx.ukans.edu/~tbird/FAQ.html

We are currently experiencing "unsubscribe" difficulties.  If you
wish to unsubscribe, please send a message containing the single line
"unsubscribe vpn your-e-mail-address" to owner-vpn at listserv.secnetgroup.com

****************************************************************