<div dir="ltr">Hi,<div><br></div><div>I have an Edimax wifi adapter which uses the RTL8188CU chipset but it doesn&#39;t work in AP mode with the current hostapd/wpa_supplicant.</div><div><br></div><div>This is the error I&#39;m getting:</div><div><br></div><div><div>nl80211: Driver does not support authentication/association or connect commands</div><div>nl80211: Remove monitor interface: refcount=0</div><div>netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)</div><div>nl80211: Set mode ifindex 4 iftype 2 (STATION)</div><div>nl80211: Failed to set interface 4 to mode 2: -19 (No such device)</div><div>nl80211 driver initialization failed.</div></div><div><br></div><div>After looking around it turns out Realtek had once released a modified hostapd (back in version 0.8.0) that indeed makes the chipset work. I also found a Github repo of just the patches modified to work with modern versions of hostapd [1].</div><div><br></div><div>My question is if accepting these patches upstream is something that you want. I&#39;m currently trying to make them work with the latest git tree because I need it for a project I work on and it would be really nice if this chipset was supported out of the box.</div><div><br></div><div>What do you think?</div><div><br></div><div>Best regards,</div><div>Petros Angelatos</div><div><br></div><div>[1] <a href="https://github.com/pritambaral/hostapd-rtl871xdrv">https://github.com/pritambaral/hostapd-rtl871xdrv</a></div></div>