<div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"><DIV style="LINE-HEIGHT: 1.7; FONT-FAMILY: arial; COLOR: #000000; FONT-SIZE: 14px">Hi, all. I want to test the EAP-SIM with hostapd and wpa_supplicant, but i failed. Can someone tell me how should i correct it? Thank you very much!<BR>
<DIV><INCLUDETAIL>
<DIV style="COLOR: rgb(0,0,0)"><BR>1.hostapd.sim_db:460021505910060:8FFD3E3F7DD1B000:778a7e3d:FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF<BR><BR>2.hostapd_sim.conf:<BR>interface=wlan0<BR>bridge=br0<BR>driver=nl80211<BR>ssid=eap-sim<BR>hw_mode=g<BR>channel=6<BR>wpa_key_mgmt=WPA-EAP<BR>wpa=1<BR>ieee8021x=1<BR>eapol_version=2<BR>eap_server=1<BR>eap_user_file=./hostapd.eap_user<BR>eap_sim_db=unix:/tmp/hlr_auc_gw.sock<BR>radius_server_clients=./hostapd.radius_clients<BR>radius_server_auth_port=1812<BR><BR>3.wpa_wupplicant_sim.conf:<BR>ctrl_interface=/var/run/wpa_supplicant<BR>ctrl_interface_group=root<BR>ap_scan=1<BR>eapol_version=2<BR><BR># EAP-SIM with a GSM SIM or USIM<BR>network={<BR>ssid="eap-sim"<BR>key_mgmt=WPA-EAP<BR>eap=SIM<BR>pin="1234"<BR>pcsc=""<BR>eapol_flags=0<BR>}<BR><BR>4.hostapd.radius_clients:<BR>0.0.0.0/0 radius<BR><BR>5.hostapd.eap_user:<BR>* SIM<BR>"0"* SIM [2]</DIV>
<DIV style="COLOR: rgb(0,0,0)">"1"* SIM [2]<BR>"2"* SIM [2]<BR>"4"* SIM [2]<BR><BR>6.hostapd result:<BR>authentication: STA=40:16:9f:16:56:44 auth_alg=0 auth_transaction=1 status_code=0 wep=0<BR> New STA<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.11: authentication OK (open system)<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-AUTHENTICATE.indication(40:16:9f:16:56:44, OPEN_SYSTEM)<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-DELETEKEYS.request(40:16:9f:16:56:44)<BR>authentication reply: STA=40:16:9f:16:56:44 auth_alg=0 auth_transaction=2 resp=0 (IE len=0)<BR>mgmt::auth cb<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.11: authenticated<BR>mgmt::reassoc_req<BR>reassociation request: STA=40:16:9f:16:56:44 capab_info=0x431 listen_interval=10 current_ap=00:14:78:71:42:67<BR> new AID 1<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.11: association OK (aid 1)<BR>mgmt::reassoc_resp cb<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.11: associated (aid 1)<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-REASSOCIATE.indication(40:16:9f:16:56:44)<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-DELETEKEYS.request(40:16:9f:16:56:44)<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>wlan0: STA 40:16:9f:16:56:44 WPA: event 1 notification<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.1X: start authentication<BR>EAP: Server state machine created<BR>IEEE 802.1X: 40:16:9f:16:56:44 BE_AUTH entering state IDLE<BR>IEEE 802.1X: 40:16:9f:16:56:44 CTRL_DIR entering state FORCE_BOTH<BR>wlan0: STA 40:16:9f:16:56:44 WPA: start authentication<BR>WPA: 40:16:9f:16:56:44 WPA_PTK entering state INITIALIZE<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>WPA: 40:16:9f:16:56:44 WPA_PTK_GROUP entering state IDLE<BR>WPA: 40:16:9f:16:56:44 WPA_PTK entering state AUTHENTICATION<BR>WPA: 40:16:9f:16:56:44 WPA_PTK entering state AUTHENTICATION2<BR>IEEE 802.1X: 40:16:9f:16:56:44 AUTH_PAE entering state DISCONNECTED<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.1X: unauthorizing port<BR>IEEE 802.1X: 40:16:9f:16:56:44 AUTH_PAE entering state RESTART<BR>EAP: EAP entering state INITIALIZE<BR>CTRL-EVENT-EAP-STARTED 40:16:9f:16:56:44<BR>EAP: EAP entering state SELECT_ACTION<BR>EAP: getDecision: no identity known yet -> CONTINUE<BR>EAP: EAP entering state PROPOSE_METHOD<BR>EAP: getNextMethod: vendor 0 type 1<BR>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1<BR>EAP: EAP entering state METHOD_REQUEST<BR>EAP: building EAP-Request: Identifier 41<BR>EAP: EAP entering state SEND_REQUEST<BR>EAP: EAP entering state IDLE<BR>EAP: retransmit timeout 3 seconds (from dynamic back off; retransCount=0)<BR>IEEE 802.1X: 40:16:9f:16:56:44 AUTH_PAE entering state CONNECTING<BR>IEEE 802.1X: 40:16:9f:16:56:44 AUTH_PAE entering state AUTHENTICATING<BR>IEEE 802.1X: 40:16:9f:16:56:44 BE_AUTH entering state REQUEST<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.1X: Sending EAP Packet (identifier 41)<BR>nl80211: Event message available<BR>nl80211: Ignored unknown event (cmd=19)<BR>IEEE 802.1X: 40:16:9f:16:56:44 TX status - version=2 type=0 length=5 - ack=0<BR>mgmt::deauth<BR>deauthentication: STA=40:16:9f:16:56:44 reason_code=3<BR>AP-STA-DISCONNECTED 40:16:9f:16:56:44<BR>wlan0: STA 40:16:9f:16:56:44 WPA: event 3 notification<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>WPA: 40:16:9f:16:56:44 WPA_PTK entering state DISCONNECTED<BR>WPA: 40:16:9f:16:56:44 WPA_PTK entering state INITIALIZE<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>wlan0: STA 40:16:9f:16:56:44 IEEE 802.11: deauthenticated<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-DEAUTHENTICATE.indication(40:16:9f:16:56:44, 3)<BR>wlan0: STA 40:16:9f:16:56:44 MLME: MLME-DELETEKEYS.request(40:16:9f:16:56:44)<BR>wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x8cbf748 key_idx=0 set_tx=1 seq_len=0 key_len=0<BR> addr=40:16:9f:16:56:44<BR>EAP: Server state machine removed<BR>mgmt::proberesp cb<BR>mgmt::proberesp cb<BR>mgmt::proberesp cb<BR>mgmt::proberesp cb<BR>mgmt::auth</DIV></INCLUDETAIL></DIV></DIV>
<DIV><BR><BR></DIV>
<DIV>--<BR>
<P>吴鹤意<BR>东南大学信息安全研究中心<BR>南京市四牌楼2号，210096<BR>QQ邮箱：<A href="mailto:715546252@qq.com">715546252@qq.com</A></P>
<P>Heyi Wu<BR>SEU Infosec<BR>#2, sipailou, Nanjing<BR>QQ mailbox:715546252@qq.com</P></DIV></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span>