<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body text="#000000" bgcolor="#ffffff">
Long story short, I was able to connect to my university's wpa2
enterprise network using wpa_supplicant with a configuration file I
found somewhere on the Internet (made the configuration file about 7
months ago). About two weeks ago my hard drive was corrupted and I lost
everything including my wpa_supplicant.conf file. After reinstalling
the same operating system (puppy linux), and using the same ssl
certificate I am unable to connect to the same network. I have tried
every configuration I for wpa enterprise (peap) that I could find
(including the one from the man page and one made by my university) but
I still keep getting the same error when attempting the 4way handshake.
It keeps repeating until I kill wpa_supplicant.<br>
<br>
Does anyone know what the culprit could be? Any help would be GREATLY
appreciated.<br>
<br>
<font color="#3333ff">State: ASSOCIATED -> 4WAY_HANDSHAKE<br>
WPA: RX message 1 of 4-Way Handshake from 00:1a:6c:3c:37:c2 (ver=1)<br>
WPA: Failed to get master session key from EAPOL state machines<br>
WPA: Key handshake aborted<br>
RX EAPOL from 00:1a:6c:3c:37:c2<br>
RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00
00 00 01 2b 67 1e 7f 46 0a 0e f1 9b 3d dc 9f 08 6a a9 2a c8 68 0c 91 e7
0a 41 06 f4 1e f3 c0 09 8e 93 8d 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00<br>
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines<br>
IEEE 802.1X RX: version=1 type=3 length=95<br>
EAPOL-Key type=254<br>
key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack)<br>
key_length=32 key_data_length=0<br>
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01<br>
key_nonce - hexdump(len=32): 2b 67 1e 7f 46 0a 0e f1 9b 3d dc 9f 08
6a a9 2a c8 68 0c 91 e7 0a 41 06 f4 1e f3 c0 09 8e 93 8d<br>
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00<br>
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00<br>
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00<br>
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00<br>
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00
00 00 00 00 00 01 2b 67 1e 7f 46 0a 0e f1 9b 3d dc 9f 08 6a a9 2a c8 68
0c 91 e7 0a 41 06 f4 1e f3 c0 09 8e 93 8d 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<br>
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE<br>
WPA: RX message 1 of 4-Way Handshake from 00:1a:6c:3c:37:c2 (ver=1)<br>
WPA: Failed to get master session key from EAPOL state machines<br>
WPA: Key handshake aborted</font><br>
<br>
Here are the specifics about the network I obtained from wpa_cli<br>
<br>
<font color="#3333ff">Selected interface 'wlan0'<br>
bssid / frequency / signal level / flags / ssid<br>
00:1a:6c:3c:2f:53 2462 159
[WPA-EAP-TKIP][WPA2-EAP-TKIP+CCMP] MYSSD</font><br>
</body>
</html>