Hi, new to the list and hoping you guys can help me. <br><br>I'm
running debian stable (Lenny) but have installed the latest
wpa_supplicant from the unstable repositories my wireless devices is
motorola wpci810g whos driver is configured used ndiswrapper.<br>
<br>I believe my wireless card is up and running properly because i can
use the iwlist scan command to see the available networks (my network
is in shown on that list)<br><br>Here is the dump if all the
information you should need to know how i have everything set up... any
help would be great (i have been working with this for a couple of
weeks now)<br>
<br>let me know if you need more info<br><br>***wpa_supplicant.conf***<br>ctrl_interface=/var/run/wpa_<div id=":1du" class="ii gt">supplicant<br><br>network={<br> ssid="Network Core"<br> key_mgmt=WPA-PSK<br>
psk="maggie93"<br>}<br><br><br>***iwlist scan***<br>wlan0 Scan completed :<br>
Cell 03 - Address: xx:xx:xx:xx:xx:xx<br> ESSID:"Network Core"<br> Mode:Master<br> Channel:7<br> Frequency:2.442 GHz (Channel 7)<br>
Quality=66/100 Signal level=-65 dBm Noise level=-62 dBm<br> Encryption key:on<br> IE: WPA Version 1<br> Group Cipher : TKIP<br> Pairwise Ciphers (1) : TKIP<br>
Authentication Suites (1) : PSK<br> IE: IEEE 802.11i/WPA2 Version 1<br> Group Cipher : TKIP<br> Pairwise Ciphers (2) : CCMP TKIP<br>
Authentication Suites (1) : PSK<br> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s<br> 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s<br> 48 Mb/s; 54 Mb/s<br>
Extra:tsf=xxxxxxxxxxxxxxxx<br><br><br>***error from wpa_cli***<br><2>Authentication with xx:xx:xx:xx:xx:xx timed out.<br><2>CTRL-E-EVENT-SCAN-RESULTS<br><2>Trying to associate with xx:xx:xx:xx:xx:xx (SSID='Network Core' freq=2442 MHz)<br>
<2>Authentication with xx:xx:xx:xx:xx:xx timed out.<br><br><br>***output from wpa_supplicant***<br>1249854777.385376:
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'wext' ctrl_interface 'N/A' bridge 'N/A'<br>
1249854777.385447: Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'<br>1249854777.385460: Reading configuration file '/etc/wpa_supplicant.conf'<br>1249854777.385503: ctrl_interface='/var/run/wpa_supplicant'<br>
1249854777.385513: Line: 3 - start of a new network block<br>1249854777.385531: ssid - hexdump_ascii(len=12):<br> 4e 65 74 77 6f 72 6b 20 43 6f 72 65 Network Core <br>1249854777.385562: key_mgmt: 0x2<br>
1249854777.385571: PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]<br>1249854777.396987: PSK (from passphrase) - hexdump(len=32): [REMOVED]<br>1249854777.397017: Priority group 0<br>1249854777.397026: id=0 ssid='Network Core'<br>
1249854778.787587: Interface wlan0 set UP - waiting a second for the driver to complete initialization<br>1249854779.787704: SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf<br>1249854779.787723: capabilities: key_mgmt 0xf enc 0xf flags 0x0<br>
1249854779.826685: WEXT: Operstate: linkmode=1, operstate=5<br>1249854779.831426: Own MAC address: 00:0f:66:e6:68:8b<br>1249854779.831439: wpa_driver_wext_set_wpa<br>1249854779.831455: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>
1249854779.831472: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0<br>1249854779.831484: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0<br>1249854779.831495: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>
1249854779.831506: wpa_driver_wext_set_countermeasures<br>1249854779.831515: wpa_driver_wext_set_drop_unencrypted<br>1249854779.831525: RSN: flushing PMKID list in the driver<br>1249854779.831547: Setting scan request: 0 sec 100000 usec<br>
1249854779.831565: WPS: UUID based on MAC address - hexdump(len=16): e7 e8 e5 58 f1 f4 50 03 98 98 cb 53 a1 e8 b5 e7<br>1249854779.831583: WPS: Build Beacon and Probe Response IEs<br>1249854779.831596: WPS: * Version<br>
1249854779.831607: WPS: * Wi-Fi Protected Setup State (0)<br>1249854779.831616: WPS: * Version<br>1249854779.831624: WPS: * Wi-Fi Protected Setup State (0)<br>1249854779.831632: WPS: * Response Type (2)<br>1249854779.831642: WPS: * UUID-E<br>
1249854779.831653: WPS: * Manufacturer<br>1249854779.831661: WPS: * Model Name<br>1249854779.831668: WPS: * Model Number<br>1249854779.831676: WPS: * Serial Number<br>1249854779.831684: WPS: * Primary Device Type<br>
1249854779.831691: WPS: * Device Name<br>1249854779.831699: WPS: * Config Methods (0)<br>1249854779.831707: WPS: * RF Bands (3)<br>1249854779.834539: EAPOL: SUPP_PAE entering state DISCONNECTED<br>1249854779.834561: EAPOL: KEY_RX entering state NO_KEY_RECEIVE<br>
1249854779.834572: EAPOL: SUPP_BE entering state INITIALIZE<br>1249854779.834583: EAP: EAP entering state DISABLED<br>1249854779.834716: Added interface wlan0<br>1249854779.834728: Daemonize..<br>1249854779.835139: Ignore event for foreign ifindex 3<br>
1249854779.835234: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>1249854779.835260: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added<br>1249854779.835287: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>
1249854779.835300: Wireless event: cmd=0x8b19 len=8<br>1249854779.835341: Received 0 bytes of scan results (0 BSSes)<br>1249854779.835392: CTRL-EVENT-SCAN-RESULTS <br>1249854779.835428: Selecting BSS from priority group 0<br>
1249854779.835440: Try to find WPA-enabled AP<br>1249854779.835453: Try to find non-WPA AP<br>1249854779.835473: No suitable AP found.<br>1249854779.835491: Setting scan request: 5 sec 0 usec<br>1249854779.835509: RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>
1249854779.835519: Wireless event: cmd=0x8b06 len=8<br>1249854780.835431: EAPOL: disable timer tick<br>1249854784.840441: State: DISCONNECTED -> SCANNING<br>1249854784.840477: Starting AP scan (broadcast SSID)<br>1249854784.840486: Trying to get current scan results first without requesting a new scan to speed up initial association<br>
1249854784.840515: Received 0 bytes of scan results (0 BSSes)<br>1249854784.840528: Cached scan results are empty - not posting<br>1249854784.840536: Selecting BSS from priority group 0<br><br></div>