<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16809" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I apologize if this is a resend: I'm not too sure 
if my previous email went through (it was marked as SPAM):</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial 
size=2>------------------------------------------------------------------------------------------------------------------------------------------------------------------</FONT></DIV>
<DIV><FONT face=Arial size=2><BR>Hello,<BR><BR>When connecting Windows 
(XP/Vista) wireless clients to a hostapd AP, DHCP<BR>offers do not 
succeed.&nbsp; When setting the network interface settings on the<BR>client to 
use a static configuration connectivity succeeds and client<BR>networking 
through the AP functions well.<BR><BR>A high-level layout of my network is as 
follows:<BR><BR>- Linux router running hostapd: 192.168.8.1<BR>- Windows Server 
2003 DC running DHCP: 192.168.8.20<BR>- Windows XP/Vista 
clients<BR><BR>Following are details of the router running hostapd:<BR><BR>- 
Bridge interface: br0<BR>- Interfaces attached to the bridge: wlan0, eth1<BR>- 
Bridge IP: 192.168.8.1<BR><BR>DHCP is working and the bridge functions: I have 
confirmed this by <BR>successfully<BR>obtaining a DHCP lease via the notebook's 
LAN port.<BR><BR>I am using the following software versions:<BR><BR>- hostapd 
0.6.9<BR>- FC10(2.6.29.1-15.fc10.i686)<BR>- ath9k<BR><BR>Following are the 
contents of my hostapd.conf 
file:<BR><BR>bridge=br0<BR>interface=wlan0<BR>driver=nl80211<BR>ssid=myessid<BR>hw_mode=g<BR>channel=6<BR>eapol_version=1<BR>logger_syslog=-1<BR>logger_syslog_level=2<BR>logger_stdout=-1<BR>logger_stdout_level=2<BR>ctrl_interface=/var/run/hostapd<BR>ctrl_interface_group=0<BR>macaddr_acl=0<BR>deny_mac_file=/etc/hostapd.deny<BR>auth_algs=3<BR>eapol_key_index_workaround=0<BR>eap_server=0<BR>dump_file=/tmp/hostapd.dump<BR>wpa=3<BR>wpa_key_mgmt=WPA-PSK<BR>wpa_pairwise=TKIP 
CCMP<BR>wpa_psk=*********<BR>ieee8021x=0<BR><BR><BR>Is there a setting in 
hostapd that must be added to allow DHCP to pass <BR>through<BR>the 
bridge.&nbsp; UDP works fine through the bridge, as the client can see 
the<BR>Windows domain and can broadcast for clients on the domain (when 
connected <BR>via<BR>a static IP or via a physical LAN 
cable).<BR><BR>Thanks<BR>-JASON <BR><BR><BR></DIV></FONT>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV></BODY></HTML>