<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=gb2312">
<META content="MSHTML 6.00.2900.5583" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi guys,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I don't know if this is the right place to ask such kind of
questions, but I really run out of ideas.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Chip: Marvell sd8686 (SDIO based)</FONT></DIV>
<DIV><FONT size=2>Kernel: Linux 2.6.24</FONT></DIV>
<DIV><FONT size=2>Driver: libertas with wireless extension (V22)</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Everything works fine, I also got a scan result using "iwlist
eth0 scan" command. But I failed to connect to my AP (WPA-PSK TKIP) with
wpa_supplicant.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Configuration file:</FONT></DIV>
<DIV><FONT size=2><A href="mailto:root@$">$</A> cat /etc/wpa.conf<BR>#
WPA-PSK/TKIP</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>ctrl_interface=/var/run/wpa_supplicant</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>network={<BR>
ssid="tiger"<BR> key_mgmt=WPA-PSK<BR>
proto=WPA<BR> pairwise=TKIP<BR>
group=TKIP<BR> psk="OnyxWpa2009"<BR>}</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Logs from wpa_supplicant:</FONT></DIV>
<DIV><FONT size=2><A href="mailto:root@$">$</A> wpa_supplicant -ddd -Dwext
-ieth0 -c/etc/wpa.conf<BR>Initializing interface 'eth0' conf '/etc/wpa.conf'
driver 'wext' ctrl_interface<BR>'N/A' bridge 'N/A'<BR>Configuration file
'/etc/wpa.conf' -> '/etc/wpa.conf'<BR>Reading configuration file
'/etc/wpa.conf'<BR>ctrl_interface='/var/run/wpa_supplicant'<BR>Line: 5 - start
of a new network block<BR>ssid -
hexdump_ascii(len=5):<BR> 74 69 67 65
72
tiger<BR>key_mgmt: 0x2<BR>proto: 0x1<BR>pairwise: 0x8<BR>group: 0x8<BR>PSK
(ASCII passphrase) - hexdump_ascii(len=11): [REMOVED]<BR>PSK (from passphrase) -
hexdump(len=32): [REMOVED]<BR>Priority group 0<BR> id=0
ssid='tiger'<BR>Initializing interface (2) 'eth0'<BR>Interface eth0 set UP -
waiting a second for the driver to complete initializati<BR>on<BR>SIOCGIWRANGE:
WE(compiled)=22 WE(source)=15 enc_capa=0xf<BR> capabilities: key_mgmt 0xf
enc 0xf flags 0x0<BR>WEXT: Operstate: linkmode=1, operstate=5<BR>Own MAC
address:
00:1a:6b:94:fb:58<BR>wpa_driver_wext_set_wpa<BR>wpa_driver_wext_set_key: alg=0
key_idx=0 set_tx=0 seq_len=0 key_len=0<BR>wpa_driver_wext_set_key: alg=0
key_idx=1 set_tx=0 seq_len=0 key_len=0<BR>wpa_driver_wext_set_key: alg=0
key_idx=2 set_tx=0 seq_len=0 key_len=0<BR>wpa_driver_wext_set_key: alg=0
key_idx=3 set_tx=0 seq_len=0
key_len=0<BR>wpa_driver_wext_set_countermeasures<BR>wpa_driver_wext_set_drop_unencrypted<BR>RSN:
flushing PMKID list in the driver<BR>Setting scan request: 0 sec 100000
usec<BR>EAPOL: SUPP_PAE entering state DISCONNECTED<BR>EAPOL: KEY_RX entering
state NO_KEY_RECEIVE<BR>EAPOL: SUPP_BE entering state INITIALIZE<BR>EAP: EAP
entering state DISABLED<BR>Added interface eth0<BR>RTM_NEWLINK: operstate=0
ifi_flags=0x1003 ([UP])<BR>RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0'
added<BR>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<BR>Wireless event:
cmd=0x8b06 len=8<BR>State: DISCONNECTED -> SCANNING<BR>Starting AP scan
(broadcast SSID)<BR>Trying to get current scan results first without requesting
a new scan to speed<BR>up initial association<BR>Received 0 bytes of scan
results (0 BSSes)<BR>Cached scan results are empty - not posting<BR>Selecting
BSS from priority group 0<BR>Try to find WPA-enabled AP<BR>Try to find non-WPA
AP<BR>No suitable AP found.<BR>Setting scan request: 0 sec 0 usec<BR>Starting AP
scan (broadcast SSID)<BR>Scan requested (ret=0) - scan timeout 5
seconds<BR>EAPOL: disable timer tick<BR>RTM_NEWLINK: operstate=0
ifi_flags=0x1003 ([UP])<BR>Wireless event: cmd=0x8b19 len=8<BR>Received 0 bytes
of scan results (0 BSSes)<BR>CTRL-EVENT-SCAN-RESULTS<BR>Selecting BSS from
priority group 0<BR>Try to find WPA-enabled AP<BR>Try to find non-WPA AP<BR>No
suitable AP found.<BR>Setting scan request: 5 sec 0 usec<BR>Starting AP scan
(broadcast SSID)<BR>Scan requested (ret=0) - scan timeout 30
seconds<BR>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<BR>Wireless event:
cmd=0x8b19 len=8<BR>Received 0 bytes of scan results (0
BSSes)<BR>CTRL-EVENT-SCAN-RESULTS<BR>Selecting BSS from priority group 0<BR>Try
to find WPA-enabled AP<BR>Try to find non-WPA AP<BR>No suitable AP
found.<BR>Setting scan request: 5 sec 0 usec<BR>Starting AP scan (broadcast
SSID)<BR>Scan requested (ret=0) - scan timeout 30 seconds<BR>RTM_NEWLINK:
operstate=0 ifi_flags=0x1003 ([UP])<BR>Wireless event: cmd=0x8b19
len=8<BR>Received 201 bytes of scan results (1
BSSes)<BR>CTRL-EVENT-SCAN-RESULTS<BR>Selecting BSS from priority group 0<BR>Try
to find WPA-enabled AP<BR>0: 00:15:e9:0e:98:d2 ssid='tiger' wpa_ie_len=22
rsn_ie_len=0 caps=0x11<BR> selected based on WPA IE<BR>
selected WPA AP 00:15:e9:0e:98:d2 ssid='tiger'<BR>Trying to associate with
00:15:e9:0e:98:d2 (SSID='tiger' freq=2437 MHz)<BR>Cancelling scan
request<BR>WPA: clearing own WPA/RSN IE<BR>Automatic auth_alg selection:
0x1<BR>WPA: using IEEE 802.11i/D3.0<BR>WPA: Selected cipher suites: group 8
pairwise 8 key_mgmt 2 proto 1<BR>WPA: set AP WPA IE - hexdump(len=24): dd 16 00
50 f2 01 01 00 00 50 f2 02 01 00<BR>00 50 f2 02 01 00 00 50 f2 02<BR>WPA:
clearing AP RSN IE<BR>WPA: using GTK TKIP<BR>WPA: using PTK TKIP<BR>WPA: using
KEY_MGMT WPA-PSK<BR>WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50
f2 01 01 00 00 50 f2<BR>02 01 00 00 50 f2 02 01 00 00 50 f2 02<BR>No keys have
been configured - skip key
clearing<BR>wpa_driver_wext_set_drop_unencrypted<BR>State: SCANNING ->
ASSOCIATING<BR>wpa_driver_wext_set_operstate: operstate 0->0
(DORMANT)<BR>WEXT: Operstate: linkmode=-1,
operstate=5<BR>wpa_driver_wext_associate<BR>wpa_driver_wext_set_psk<BR>Association
request to the driver failed</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>It would be very appreciated if someone can help
me.</FONT></DIV></BODY></HTML>