iw list output:<br><font size="2" face="Arial">Wiphy 
phy0<br>        Band 
1:<br>                
Frequencies:<br>                        
* 2412 
MHz<br>                        
* 2417 
MHz<br>                        
* 2422 
MHz<br>                        
* 2427 
MHz<br>                        
* 2432 
MHz<br>                        
* 2437 
MHz<br>                        
* 2442 
MHz<br>                        
* 2447 
MHz<br>                        
* 2452 
MHz<br>                        
* 2457 
MHz<br>                        
* 2462 
MHz<br>                
Bitrates:<br>                        
* 1.0 
Mbps<br>                        
* 2.0 
Mbps<br>                        
* 5.5 
Mbps<br>                        
* 11.0 
Mbps<br>                        
* 6.0 
Mbps<br>                        
* 9.0 
Mbps<br>                        
* 12.0 
Mbps<br>                        
* 18.0 
Mbps<br>                        
* 24.0 
Mbps<br>                        
* 36.0 
Mbps<br>                        
* 48.0 
Mbps<br>                        
* 54.0 Mbps<br>        Band 
2:<br>                
Frequencies:<br>                        
* 5180 
MHz<br>                        
* 5200 
MHz<br>                        
* 5220 
MHz<br>                        
* 5240 
MHz<br>                        
* 5260 MHz (passive scanning, no 
IBSS)<br>                        
* 5280 MHz (passive scanning, no 
IBSS)<br>                        
* 5300 MHz (passive scanning, no 
IBSS)<br>                        
* 5320 MHz (passive scanning, no 
IBSS)<br>                        
* 5500 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5520 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5540 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5560 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5580 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5600 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5620 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5640 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5660 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5680 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5700 MHz (disabled, passive scanning, no 
IBSS)<br>                        
* 5745 
MHz<br>                        
* 5765 
MHz<br>                        
* 5785 
MHz<br>                        
* 5805 
MHz<br>                        
* 5825 
MHz<br>                
Bitrates:<br>                        
* 6.0 
Mbps<br>                        
* 9.0 
Mbps<br>                        
* 12.0 
Mbps<br>                        
* 18.0 
Mbps<br>                        
* 24.0 
Mbps<br>                        
* 36.0 
Mbps<br>                        
* 48.0 
Mbps<br>                        
* 54.0 Mbps<br>        Supported interface 
modes:<br>                 
* 
IBSS<br>                 
* 
Station<br>                 
* 
AP<br>                 
* 
AP(VLAN)<br></font><font size="2" face="Arial">                 
* Monitor</font><br><font size="2" face="Arial"><br>hostapd didn&#39;t produce any dmesg output, even when I use -dd. Is there another way to produce more debugging?<br></font>