interface=wlan0
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=1
ssid=testing123
country_code=DE
ieee80211d=1
ieee80211h=1
hw_mode=g
channel=1

# Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
beacon_int=15

# DTIM (delivery trafic information message) period (range 1..255):
# number of beacons between DTIMs (1 = every beacon includes DTIM element)
# (default: 2)
#dtim_period=1

max_num_sta=255

#rts_threshold=2347
#fragm_threshold=2346

# IEEE 802.11 specifies two authentication algorithms. hostapd can be
# configured to allow both of these or only one. Open system authentication
# should be used with IEEE 802.1X.
# Bit fields of allowed authentication algorithms:
# bit 0 = Open System Authentication
# bit 1 = Shared Key Authentication (requires WEP)
#auth_algs=3
#ignore_broadcast_ssid=-1

#wme_enabled=0

#bridge_packets=0
#max_listen_interval=100

# Whether PMK-R1 push is enabled at R0KH
# 0 = do not push PMK-R1 to all configured R1KHs (default)
# 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived
#pmk_r1_push=1
#passive_scan_interval=0