<table cellspacing='0' cellpadding='0' border='0' ><tr><td valign='top' style='font: inherit;'>Hi,<br>Our company implemented a foundry networks wireless solution with 5 ap200's and foundry wireless roaming controller. When trying to auth, our ad says Im still trying to use eap instead of peap. Below is my failed auth, and a good authenticated session. Even though im using EAP=PEAP, the windows radius server still says im trying to use EAP. Any help is appreciated.<br><br>User john*********r@green.****** was denied access.<br> Fully-Qualified-User-Name = green.*******/*******/Users/US2/IT/John <br> NAS-IP-Address = *.*.*.*<br> NAS-Identifier = <not present> <br> Called-Station-Identifier = 00-90-0B-0A-1A-A5:Green_WPA2_SSID<br> Calling-Station-Identifier = 00-1F-3C-55-91-75<br> Client-Friendly-Name = us2-s-wpan-1a<br> Client-IP-Address = *.*.*.*<br> NAS-Port-Type = Wireless - IEEE
802.11<br> NAS-Port = 2050<br> Proxy-Policy-Name = Use Windows authentication for all users<br> Authentication-Provider = Windows <br> Authentication-Server = <undetermined> <br> Policy-Name = GreenWireless2<br> Authentication-Type = <span style="font-weight: bold;">EAP</span><br> EAP-Type = <undetermined> <br> Reason-Code = 22<br> Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server. <br><br>Working authentication....<br><br>User **********@green.******** was granted access.<br> Fully-Qualified-User-Name = green.******/******/Users/US2/IT/Craig<br> NAS-IP-Address = *.*.*.*<br> NAS-Identifier = <not present> <br> Client-Friendly-Name = us2-s-wpan-1a<br> Client-IP-Address = *.*.*.*<br> Calling-Station-Identifier = 00-90-4B-7F-90-5A<br> NAS-Port-Type = Wireless - IEEE
802.11<br> NAS-Port = 2049<br> Proxy-Policy-Name = Use Windows authentication for all users<br> Authentication-Provider = Windows <br> Authentication-Server = <undetermined> <br> Policy-Name = GreenWireless2<br> Authentication-Type = <span style="font-weight: bold;">PEAP</span><br> EAP-Type = Smart Card or other certificate<br><br><br>hardware info...<br><br>c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)<br> Subsystem: Intel Corporation Unknown device 1020<br> Flags: bus master, fast devsel, latency 0, IRQ 218<br> Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [c8] Power Management version 2<br> Capabilities: [d0] Message Signalled
Interrupts: Mask- 64bit+ Queue=0/0 Enable+<br> Capabilities: [e0] Express Legacy Endpoint IRQ 0<br><br>Kernel...<br><br>ubuntu 8.04 2.6.24-18-generic<br><br>wpa supplicant.conf........<br><br>ctrl_interface=/var/run/wpa_supplicant<br><br>network={<br> ssid="Green_SSID"<br> scan_ssid=1<br> key_mgmt=WPA-EAP<br> proto=WPA2<br> eap=PEAP<br> pairwise=CCMP<br> group=CCMP<br># phase1="peapver=0 peaplabel=1"<br> phase2="auth=MSCHAPV2"<br>
identity="john********@green.*******"<br> ca_cert="/etc/cert/********.pem"<br> private_key="/etc/cert/********.pem"<br> private_key_passwd="**********"<br>}<br><br><br>Thanks,<br>John<br><br></td></tr></table><br>