<pre>>On Tue, Jun 17, 2008 at 07:56:10PM +0200, Marcin Ni¶kiewicz wrote:<br>>[...]<br>>><i> ap_scan=2<br></i>>><i> Priority group 0<br></i>><br>>Do you have hidden ssid? If so, try to broadcast ssid and set ap_scan to<br>
>1 in wpa_supplicant.conf.<br>><br>>KJ<br><br><br></pre>thanks for fast response....<br>i don't have hidden ssid - i changed ap_scan to 1 and still not good :/<br>wpa_supplicant -c/etc/wpa_supplicant.conf -ieth1 -d<br>
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'<br>Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'<br>
Reading configuration file '/etc/wpa_supplicant.conf'<br>ctrl_interface='/var/run/wpa_supplicant'<br>ctrl_interface_group='wheel' (DEPRECATED)<br>update_config=0<br>fast_reauth=1<br>ap_scan=1<br>Priority group 0<br>
id=0 ssid='golecyce'<br>Initializing interface (2) 'eth1'<br>EAPOL: SUPP_PAE entering state DISCONNECTED<br>EAPOL: KEY_RX entering state NO_KEY_RECEIVE<br>EAPOL: SUPP_BE entering state INITIALIZE<br>EAP: EAP entering state DISABLED<br>
EAPOL: External notification - portEnabled=0<br>EAPOL: External notification - portValid=0<br>SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf<br> capabilities: key_mgmt 0xf enc 0xf<br>WEXT: Operstate: linkmode=1, operstate=5<br>
Own MAC address: 00:1d:e0:04:c8:8f<br>wpa_driver_wext_set_wpa<br>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0<br>
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_countermeasures<br>ioctl[SIOCSIWAUTH]: Operation not supported<br>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted<br>
ioctl[SIOCSIWAUTH]: Operation not supported<br>WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec<br>Using existing control interface directory.<br>ctrl_interface_group=10 (from group name 'wheel')<br>
Added interface eth1<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b06 len=12<br>State: DISCONNECTED -> SCANNING<br>Starting AP scan (broadcast SSID)<br>Trying to get current scan results first without requesting a new scan to speed up initial association<br>
Received 0 bytes of scan results (0 BSSes)<br>Scan results: 0<br>Selecting BSS from priority group 0<br>Try to find WPA-enabled AP<br>Try to find non-WPA AP<br>No suitable AP found.<br>Setting scan request: 0 sec 0 usec<br>
Starting AP scan (broadcast SSID)<br>Scan requested (ret=0) - scan timeout 5 seconds<br>Scan timeout - try to get results<br>Received 0 bytes of scan results (0 BSSes)<br>Scan results: 0<br>Selecting BSS from priority group 0<br>
Try to find WPA-enabled AP<br>Try to find non-WPA AP<br>No suitable AP found.<br>Setting scan request: 5 sec 0 usec<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b06 len=12<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>
Wireless event: cmd=0x8b1a len=24<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b06 len=12<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b1a len=24<br>Starting AP scan (broadcast SSID)<br>
Scan requested (ret=0) - scan timeout 5 seconds<br>Scan timeout - try to get results<br>Received 0 bytes of scan results (0 BSSes)<br>Scan results: 0<br>Selecting BSS from priority group 0<br>Try to find WPA-enabled AP<br>
Try to find non-WPA AP<br>No suitable AP found.<br>Setting scan request: 5 sec 0 usec<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b06 len=12<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>
Wireless event: cmd=0x8b1a len=24<br><br>