Hi everyone,<br>I've seen the same problem more time in this mailing list, but I'm not able to understand how could I resolve it. :-)<br>Well, I've installed an Intel ipw3945 in my Slackware 12 and it works correctly (without authentication WEP WPA etc.).
<br>After that I've built and installed wpa_supplicant 0.5.9., and tried to launch with this "classical" configuration file:<br><br>ctrl_interface=/var/run/wpa_supplicant<br>ap_scan=0<br>network={<br> ssid="alegigijacopogiulio...ntwk!"
<br> proto=WPA<br> key_mgmt=WPA-PSK<br> pairwise=CCMP TKIP<br> group=CCMP TKIP WEP104 WEP40<br> psk=my_psk_in_hex<br> priority=5<br>}<br clear="all"><br>Now, running wpa_supplicant (with: wpa_supplicant -eth1 -Dwext -c/etc/wpa_supplicant.conf -dd) it initially authenticates,
<br>but after some seconds it says me:<br> ...<br> Authentication with 00:1b:11:86:d7:8a timed out.<br> Added BSSID 00:1b:11:86:d7:8a into blacklist<br> wpa_driver_wext_disassociate<br> ...
<br><br>and I'm not able to obtain an IP address using dhcp (consequently?).<br>I've checked /var/log/messages, syslog (without infos), and dmesg that says me:<br> ...<br> eth1: no IPv6 routers present
<br> ...<br><br>Anyone could help me? Below I've pasted the output of wpa_supplicant.<br>Thank's in advance! <br><br>Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
<br>Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'<br>Reading configuration file '/etc/wpa_supplicant.conf'<br>ctrl_interface='/var/run/wpa_supplicant'<br>ctrl_interface_group='0' (DEPRECATED)
<br>ap_scan=0<br>Line: 22 - start of a new network block<br>ssid - hexdump_ascii(len=27):<br> 61 6c 65 67 69 67 69 6a 61 63 6f 70 6f 67 69 75 alegigijacopogiu<br> 6c 69 6f 2e 2e 2e 6e 74 77 6b 21 lio...ntwk!
<br>proto: 0x1<br>key_mgmt: 0x2<br>pairwise: 0x18<br>group: 0x1e<br>PSK - hexdump(len=32): [REMOVED]<br>priority=5 (0x5)<br>Priority group 5<br> id=0 ssid='alegigijacopogiulio...ntwk!'<br>Initializing interface (2) 'eth1'
<br>EAPOL: SUPP_PAE entering state DISCONNECTED<br>EAPOL: KEY_RX entering state NO_KEY_RECEIVE<br>EAPOL: SUPP_BE entering state INITIALIZE<br>EAP: EAP entering state DISABLED<br>EAPOL: External notification - portEnabled=0
<br>EAPOL: External notification - portValid=0<br>SIOCGIWRANGE: WE(compiled)=22 WE(source)=16 enc_capa=0xf<br> capabilities: key_mgmt 0xf enc 0xf<br>WEXT: Operstate: linkmode=1, operstate=5<br>Own MAC address: 00:18:de:13:99:fe
<br>wpa_driver_wext_set_wpa<br>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
<br>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_countermeasures<br>wpa_driver_wext_set_drop_unencrypted<br>Setting scan request: 0 sec 100000 usec<br>ctrl_interface_group=0
<br>Added interface eth1<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()<br>Wireless event: cmd=0x8b06 len=8<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added<br>
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added<br>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])<br>RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
<br>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])<br>Wireless event: cmd=0x8b15 len=20<br>Wireless event: new AP: 00:1b:11:86:d7:8a<br>State: DISCONNECTED -> ASSOCIATED<br>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
<br>WEXT: Operstate: linkmode=-1, operstate=5<br>Associated to a new BSS: BSSID=00:1b:11:86:d7:8a<br>No keys have been configured - skip key clearing<br>Network configuration found for the current AP<br>WPA: No WPA/RSN IE available from association info
<br>WPA: Set cipher suites based on configuration<br>WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2 proto 1<br>WPA: clearing AP WPA IE<br>WPA: clearing AP RSN IE<br>WPA: using GTK CCMP<br>WPA: using PTK CCMP
<br>WPA: using KEY_MGMT WPA-PSK<br>WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02<br>EAPOL: External notification - EAP success=0<br>EAPOL: External notification - EAP fail=0
<br>EAPOL: External notification - portControl=Auto<br>Associated with 00:1b:11:86:d7:8a<br>WPA: Association event - clear replay counter<br>EAPOL: External notification - portEnabled=0<br>EAPOL: External notification - portValid=0
<br>EAPOL: External notification - EAP success=0<br>EAPOL: External notification - portEnabled=1<br>EAPOL: SUPP_PAE entering state CONNECTING<br>EAPOL: SUPP_BE entering state IDLE<br>Setting authentication timeout: 10 sec 0 usec
<br>Cancelling scan request<br>EAPOL: startWhen --> 0<br>EAPOL: SUPP_PAE entering state CONNECTING<br>EAPOL: txStart<br>WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)<br>Authentication with 00:1b:11:86:d7:8a timed out.
<br>Added BSSID 00:1b:11:86:d7:8a into blacklist<br>wpa_driver_wext_disassociate<br>No keys have been configured - skip key clearing<br>State: ASSOCIATED -> DISCONNECTED<br>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
<br>WEXT: Operstate: linkmode=-1, operstate=5<br>EAPOL: External notification - portEnabled=0<br>EAPOL: SUPP_PAE entering state DISCONNECTED<br>EAPOL: SUPP_BE entering state INITIALIZE<br>EAPOL: External notification - portValid=0
<br>EAPOL: External notification - EAP success=0<br>Setting scan request: 0 sec 0 usec<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b15 len=20<br>Wireless event: new AP: 00:00:00:00:00:00<br>
Added BSSID 00:00:00:00:00:00 into blacklist<br>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys<br>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
<br>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>
State: DISCONNECTED -> DISCONNECTED<br>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>WEXT: Operstate: linkmode=-1, operstate=5<br>EAPOL: External notification - portEnabled=0<br>EAPOL: External notification - portValid=0
<br>EAPOL: External notification - EAP success=0<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added<br><br><br>-- <br>I disapprove of what you say, but I will defend to the death your right to say it.
<br>Voltaire