Hi All,<br><br>From last two weeks, I am working on this problem. I am working on FC8 with kernel version 2.6.23.1-42. <br><br>I am using Linksys wireless adapter (WUSB54G). I didn't found any linux drivers for this device. so by using ndiswrappers I installed windows native drives in linux box. finally adapter got detected.
<br><br>after words I try to use this wpa_supplicant on this adapter. Hear I am facing problem<br><br>In debugging mode I am getting so many IOCTL errors. I am not getting, there errors are from ndiswrapper or wpa_supplicant.
<br><br>plz help me in this regard.<br><br>my setup details:<br><br><b>wireless adapter</b>: Linksys WUSB54G <br><b><br>ndiswrappers version:</b> <br><br>[root@sukumar wpa_supplicant]# ndiswrapper -l<br>rt2500usb : driver installed
<br> device (13B1:000D) present (alternate driver: rt2500usb)<br><br>[root@sukumar wpa_supplicant]# ndiswrapper -v<br>utils version: '1.9', utils version needed by module: '1.9'<br>module details:<br>
filename: /lib/modules/2.6.23.1-42.fc8/extra/ndiswrapper/ndiswrapper.ko<br>version: 1.48<br>vermagic: 2.6.23.1-42.fc8 SMP mod_unload 686 4KSTACKS<br><br><br><br><b>wpa_supplicant logs:</b><br><br>[root@sukumar
wpa_supplicant]# wpa_supplicant -D wext -iwlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf -dd<br>Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
<br>Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'<br>Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'<br>ctrl_interface='/var/run/wpa_supplicant'
<br>ctrl_interface_group='wheel' (DEPRECATED)<br>ap_scan=2<br>Line: 4 - start of a new network block<br>ssid - hexdump_ascii(len=10):<br> XXXXXXX<br>scan_ssid=1 (0x1)<br>key_mgmt: 0x1<br>eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
<br>identity - hexdump_ascii(len=7):<br> 64 65 66 61 75 6c 74 default<br>password - hexdump_ascii(len=7): [REMOVED]<br>Priority group 0<br> id=0 ssid='XXXXXX'<br>Initializing interface (2) 'wlan0'
<br>EAPOL: SUPP_PAE entering state DISCONNECTED<br>EAPOL: KEY_RX entering state NO_KEY_RECEIVE<br>EAPOL: SUPP_BE entering state INITIALIZE<br>EAP: EAP entering state DISABLED<br>EAPOL: External notification - portEnabled=0
<br>EAPOL: External notification - portValid=0<br>SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf<br> capabilities: key_mgmt 0xf enc 0xf<br>WEXT: Operstate: linkmode=1, operstate=5<br>Own MAC address: 00:18:39:05:26:46
<br>wpa_driver_wext_set_wpa<br>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
<br>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>wpa_driver_wext_set_countermeasures<br><b>ioctl[SIOCSIWAUTH]: Operation not supported</b><br>WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
<br><b>ioctl[SIOCSIWAUTH]: Operation not supported</b><br>WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec<br>ctrl_interface_group=10 (from group name 'wheel')<br>Added interface wlan0<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
<br>Wireless event: cmd=0x8b06 len=8<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added<br>State: DISCONNECTED -> SCANNING<br>Trying to associate with SSID 'XXXXXX'
<br>Cancelling scan request<br>WPA: clearing own WPA/RSN IE<br>Automatic auth_alg selection: 0x1<br>WPA: No WPA/RSN IE available from association info<br>WPA: Set cipher suites based on configuration<br>WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 1 proto 2
<br>WPA: clearing AP WPA IE<br>WPA: clearing AP RSN IE<br>WPA: using GTK CCMP<br>WPA: using PTK CCMP<br>WPA: using KEY_MGMT 802.1X<br>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
<br>No keys have been configured - skip key clearing<br>wpa_driver_wext_set_drop_unencrypted<br><b>ioctl[SIOCSIWAUTH]: Operation not supported</b><br>WEXT auth param 5 value 0x1 - State: SCANNING -> ASSOCIATING<br>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
<br>WEXT: Operstate: linkmode=-1, operstate=5<br>wpa_driver_wext_associate<br>Setting authentication timeout: 60 sec 0 usec<br>EAPOL: External notification - portControl=Auto<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
<br>Wireless event: cmd=0x8b06 len=8<br>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>Wireless event: cmd=0x8b1a len=18<br>CTRL_IFACE monitor attached - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 38 30 34 2d 38 30 00
<br>RX ctrl_iface - hexdump_ascii(len=10):<br> 49 4e 54 45 52 46 41 43 45 53 INTERFACES<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>
<b>ioctl[SIOCGIFADDR]: Cannot assign requested address</b><br>RX ctrl_iface - hexdump_ascii(len=13):<br> 4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53 LIST_NETWORKS<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING
<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>CTRL-EVENT-TERMINATING - signal 2 received<br>CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 38 30 34 2d 38 30 00
<br>Removing interface wlan0<br>State: ASSOCIATING -> DISCONNECTED<br>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>WEXT: Operstate: linkmode=-1, operstate=5<br>No keys have been configured - skip key clearing
<br>EAPOL: External notification - portEnabled=0<br>EAPOL: External notification - portValid=0<br>wpa_driver_wext_set_wpa<br>wpa_driver_wext_set_drop_unencrypted<br>ioctl[SIOCSIWAUTH]: Operation not supported<br>WEXT auth param 5 value 0x0 - wpa_driver_wext_set_countermeasures
<br>ioctl[SIOCSIWAUTH]: Operation not supported<br>WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing<br>CTRL_IFACE wait for attached monitors to receive messages<br>cCancelling scan request<br>
Cancelling authentication timeout<br>WEXT: Operstate: linkmode=0, operstate=6<br><br><br><br>Thanks and regards,<br>Sukumar<br><br><br><br><br>