<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.3059" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>
<DIV>
<DIV>This is going to be long. Here are some logs, starting with dmesg logs
resulting from modprobe hostap_pci:</DIV>
<DIV> </DIV>
<DIV>hostap_crypt: registered algorithm 'NULL'<BR>hostap_pci: 0.4.9 - 2006-05-06
(Jouni Malinen <jkmaline@cc.hut.fi>)<BR>PCI: Found IRQ 3 for device
01:08.0<BR>PCI: Sharing IRQ 3 with 00:01.0<BR>hostap_pci: Registered netdevice
wifi0<BR>wifi0: Original COR value: 0x0<BR>hostap_pci: assuming no Primary image
in flash - card initialization not completed<BR>wifi0: test Genesis mode with
HCR 0x1f<BR>wifi0: Original COR value: 0x0<BR>Readback test failed, HCR 0x1f
write 00 e1 a1 ff read 00 ce a1 ce<BR>wifi0: test Genesis mode with HCR
0x0f<BR>wifi0: Original COR value: 0xa1<BR>Readback test succeeded, HCR
0x0f<BR>wifi0: Intersil Prism2.5 PCI: mem=0x41100000, irq=3<BR>wifi0: registered
netdevice wlan0<BR>wifi0: cannot get RID fdc6 (len=12) - no PRI f/w<BR>wifi0:
cannot get RID fdc1 (len=2) - no PRI f/w<BR>wifi0: cannot get RID fdc6 (len=12)
- no PRI f/w<BR>wifi0: cannot get RID fc06 (len=2) - no PRI f/w<BR>wifi0: cannot
get RID fd42 (len=6) - no PRI f/w<BR>wifi0: cannot get RID fc0e (len=34) - no
PRI f/w<BR>wifi0: cannot get RID fc84 (len=2) - no PRI f/w<BR>wifi0: cannot get
RID fc83 (len=2) - no PRI f/w<BR>wifi0: cannot get RID fc82 (len=2) - no PRI
f/w<BR>wifi0: cannot get RID fc09 (len=2) - no PRI f/w<BR>wifi0: cannot get RID
fd48 (len=2) - no PRI f/w<BR>wifi0: could not set interface UP - no PRI
f/w<BR>wlan0: cannot get RID fdc6 (len=12) - no PRI f/w<BR>wlan0: cannot get RID
fdc1 (len=2) - no PRI f/w<BR>wlan0: cannot get RID fdc6 (len=12) - no PRI
f/w<BR>wlan0: cannot get RID fc06 (len=2) - no PRI f/w<BR>wlan0: cannot get RID
fd42 (len=6) - no PRI f/w<BR>wlan0: cannot get RID fc0e (len=34) - no PRI
f/w<BR>wlan0: cannot get RID fc84 (len=2) - no PRI f/w<BR>wlan0: cannot get RID
fc83 (len=2) - no PRI f/w<BR>wlan0: cannot get RID fc82 (len=2) - no PRI
f/w<BR>wlan0: cannot get RID fc09 (len=2) - no PRI f/w<BR>wlan0: cannot get RID
fd48 (len=2) - no PRI f/w<BR>wlan0: could not set interface UP - no PRI
f/w<BR>wifi0: cannot set RID fc0e (len=34) - no PRI f/w<BR>wifi0: Host AP mode
does not support 'Any' essid<BR>wlan0: cannot set RID fc0e (len=34) - no PRI
f/w<BR>wlan0: Host AP mode does not support 'Any' essid<BR></DIV>
<DIV> </DIV>
<DIV>Here's the output from hostap_fw_load wlan0: (I did add -v to the
prism2_srec commands in the process of trying to figure this out. Also, this is
a bit different then my original post, more details below.)</DIV>
<DIV> </DIV>
<DIV>Downloading primary firmware /etc/firmware/PM010102.hex<BR>Special S3
firmware info record - name 'PM010102.HEX'<BR>Start address 0x003f0000<BR>S3
CRC-16 generation record: start=0x007E17FE len=2 prog=0<BR>srec summary for
PM010102.hex<BR>Included file name: PM010102.HEX<BR>Component: 0x0015 1.1.2
(primary firmware)<BR>Supported platforms:<BR> 0x800e 1.0.0, 0x8015
1.0.0, 0x8019 1.0.0, 0x801d 1.0.0, 0x8024 1.0.0<BR>Interface
compatibility information:<BR> role=Supplier variant=2 range=4-4
iface=Primary Firmware-Driver (3)<BR> role=Actor
variant=2 range=1-1 iface=Controller-Firmware (2)<BR>Separate S3 data
areas:<BR>S3 area count: 3<BR> addr=0x007E0000..0x007E092F
(len=2352)<BR> addr=0x007E0A00..0x007E13D7 (len=2520)<BR>
addr=0x007E17FE..0x007E17FF (len=2)<BR>Total data length: 4874<BR>Start address
0x003f0000</DIV>
<DIV> </DIV>
<DIV>Wireless LAN card information:<BR>Components:<BR> NICID: 0x0000
v0.0.0<BR> PRIID: 0x0000 v0.0.0<BR> STAID: 0x0000
v0.0.0<BR>Interface compatibility information:<BR> PRI role=Supplier
variant=0 range=0-0 iface=?? (0)<BR> PRI role=Supplier variant=0 range=0-0
iface=?? (0)<BR> PRI role=Supplier variant=0 range=0-0 iface=??
(0)<BR> STA role=Supplier variant=0 range=0-0 iface=?? (0)<BR> PRI
role=Supplier variant=0 range=0-0 iface=?? (0)<BR> STA role=Supplier
variant=0 range=0-0 iface=?? (0)<BR> STA role=Supplier variant=0 range=0-0
iface=?? (0)<BR> <BR>Verifying update compatibility and combining
data:<BR>Plugging PDR 0x0003 at 0x007e1370 (len=12)<BR>PDR 0x0003 not found from
wlan card PDA. Using default data.<BR> len=12: 39 39 53 41 30 31 30 30 30
30 30 30<BR>Plugging PDR 0x0005 at 0x007e11c8 (len=2)<BR>PDR 0x0005 not found
from wlan card PDA. Using default data.<BR> len=2: 00 01<BR>Plugging PDR
0x0006 at 0x007e13a8 (len=10)<BR>PDR 0x0006 not found from wlan card PDA. Using
default data.<BR> len=10: 00 00 01 00 00 00 01 00 01 00<BR>Plugging PDR
0x0007 at 0x007e13bc (len=10)<BR>PDR 0x0007 not found from wlan card PDA. Using
default data.<BR> len=10: 00 00 02 00 00 00 01 00 01 00<BR>Plugging PDR
0x0008 at 0x007e137c (len=8)<BR>PDR 0x0008 not found from wlan card PDA. Using
default data.<BR> len=8: 00 80 01 00 00 00 00 00<BR>Plugging PDR 0x0400 at
0x007e11cc (len=2)<BR>Plugging PDR 0400 (NIC configuration): ram16=1 pci=1 (07
00)<BR>Plugging PDR 0x0402 at 0x007e11d6 (len=4)<BR>PDR 0x0402 not found from
wlan card PDA. Using default data.<BR> len=4: 73 38 60 12<BR>Plugging PDR
0x0403 at 0x007e11ce (len=16)<BR>PDR 0x0403 not found from wlan card PDA. Using
default data.<BR> len=16: 00 00 00 02 00 80 01 01 73 38 60 12 73 38 60
12<BR>Plugging PDR 0x0404 at 0x007e11de (len=10)<BR>PDR 0x0404 not found from
wlan card PDA. Using default data.<BR> len=10: 01 00 00 00 00 00 02 7e 01
00<BR>Plugging PDR 0x0408 at 0x007e11ca (len=2)<BR>PDR 0x0408 not found from
wlan card PDA. Using default data.<BR> len=2: 64 00<BR>Plugging PDR 0x0001
at 0x007e1384 (len=16)<BR>PDR 0x0001 not found from wlan card PDA. Using default
data.<BR> len=16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00<BR>OK.</DIV>
<DIV> </DIV>
<DIV>Downloading to volatile memory
(RAM).<BR>OK.<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data
available<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data
available<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data available<BR>Special S3
firmware info record - name 'PM010102.HEX'<BR>Start address 0x003f0000<BR>S3
CRC-16 generation record: start=0x007E17FE len=2 prog=0<BR>srec summary for
PM010102.hex<BR>Included file name: PM010102.HEX<BR>Component: 0x0015 1.1.2
(primary firmware)<BR>Supported platforms:<BR> 0x800e 1.0.0, 0x8015
1.0.0, 0x8019 1.0.0, 0x801d 1.0.0, 0x8024 1.0.0<BR>Interface
compatibility information:<BR> role=Supplier variant=2 range=4-4
iface=Primary Firmware-Driver (3)<BR> role=Actor
variant=2 range=1-1 iface=Controller-Firmware (2)<BR>Separate S3 data
areas:<BR>S3 area count: 3<BR> addr=0x007E0000..0x007E092F
(len=2352)<BR> addr=0x007E0A00..0x007E13D7 (len=2520)<BR>
addr=0x007E17FE..0x007E17FF (len=2)<BR>Total data length: 4874<BR>Start address
0x003f0000</DIV>
<DIV> </DIV>
<DIV>STAID not available (maybe running PRI-only)<BR>Could not read wlan PDA.
This requires PRISM2_DOWNLOAD_SUPPORT definition
in<BR>driver/module/hostap_config.h.<BR></DIV>
<DIV>The dmesg output for that is:</DIV>
<DIV> </DIV>
<DIV>prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3<BR>wifi0: test
Genesis mode with HCR 0x0f<BR>wifi0: Original COR value: 0x0<BR>Readback test
succeeded, HCR 0x0f<BR>prism2_hw_init: initialized in 0 ms<BR>wifi0: valid PDA
not found<BR>wifi0: NIC: id=0x8000 v0.0.1<BR>wifi0: PRI: id=0x15 v1.1.2<BR>Could
not get RID for component STA<BR>wifi0: Failed to read STA f/w version - only
Primary f/w present<BR></DIV>
<DIV>My original post was the result of running the script a second time. Here's
the output of that with the -v info:</DIV>
<DIV> </DIV>
<DIV>Downloading secondary (station) firmware
/etc/firmware/RF010804.hex<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data
available<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data
available<BR>ioctl[PRISM2_IOCTL_HOSTAPD]: No data available<BR>S3 CRC-16
generation record: start=0x007E1800 len=65536 prog=1<BR>Special S3 firmware info
record - name 'rf010804.hex'<BR>Start address 0x003f0c01<BR>srec summary for
RF010804.hex<BR>Included file name: rf010804.hex<BR>Component: 0x001f 1.8.4
(station firmware)<BR>Supported platforms:<BR> 0x800a 1.0.0, 0x800b
1.0.0, 0x800c 1.0.0, 0x800d 1.0.0, 0x8012 1.0.0<BR>
0x8013 1.0.0, 0x8014 1.0.0, 0x8016 1.0.0, 0x8017 1.0.0,
0x8018 1.0.0<BR> 0x801a 1.0.0, 0x801b 1.0.0, 0x801c
1.0.0, 0x8021 1.0.0, 0x8022 1.0.0<BR> 0x8023 1.0.0,
0x800a 1.0.0, 0x800e 1.0.0, 0x8015 1.0.0, 0x8019
1.0.0<BR> 0x801d 1.0.0, 0x8024 1.0.0<BR>Interface compatibility
information:<BR> role=Supplier variant=4 range=1-15 iface=Station
Firmware-Driver (4)<BR> role=Actor variant=1 range=1-1
iface=Modem-Firmware (1)<BR> role=Actor variant=2
range=1-1 iface=Controller-Firmware (2)<BR> role=Actor
variant=1 range=4-4 iface=Primary Firmware-Driver (3)<BR>Separate S3 data
areas:<BR>S3 area count: 3<BR> addr=0x007E1800..0x007EEAAB
(len=53932)<BR> addr=0x007F0800..0x007F17FF (len=4096)<BR>
addr=0x007FE000..0x007FECD1 (len=3282)<BR>Total data length: 61310<BR>Start
address 0x003f0c01</DIV>
<DIV> </DIV>
<DIV>STAID not available (maybe running PRI-only)<BR>Could not read wlan PDA.
This requires PRISM2_DOWNLOAD_SUPPORT definition
in<BR>driver/module/hostap_config.h.<BR></DIV>
<DIV>There are no dmesg entries produced for that.</DIV>
<DIV> </DIV></DIV></DIV></FONT><BR><BR><BR><DIV><FONT style="color: black; font: normal 10pt ARIAL, SAN-SERIF;"><HR style="MARGIN-TOP: 10px">See what's free at <A title="http://www.aol.com?ncid=AOLAOF00020000000503" href="http://www.aol.com?ncid=AOLAOF00020000000503" target="_blank">AOL.com</A>. </FONT></DIV></BODY></HTML>