$  ./wpa_supplicant -Dwired -ieth0 -c examples/fast.conf -dd

Initializing interface 'eth0' conf 'examples/fast.conf' driver 'wired' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'examples/fast.conf' -> '/home/ram/Lpx/LpxAppSW/LpxSupplicant/examples/fast.conf'
Reading configuration file '/home/ram/Lpx/LpxAppSW/LpxSupplicant/examples/fast.conf'
ap_scan=0
eapol_version=1
Line: 7 - start of a new network block
key_mgmt: 0x1
proto: 0x2
eap methods - hexdump(len=16): 00 00 00 00 2b 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=4):
     74 65 73 74                                       test            
password - hexdump_ascii(len=7): [REMOVED]
pac_file - hexdump_ascii(len=15):
     62 6c 6f 62 3a 2f 2f 70 61 63 5f 66 69 6c 65      blob://pac_file 
pairwise: 0x10
group: 0x10
phase1 - hexdump_ascii(len=19):
     66 61 73 74 5f 70 72 6f 76 69 73 69 6f 6e 69 6e   fast_provisionin
     67 3d 31                                          g=1             
phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32            auth=MSCHAPV2   

Initializing interface (2) 'eth0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wired_init: Added multicast membership with packet socket
Own MAC address: 00:b0:d0:d3:4b:91
Setting scan request: 0 sec 100000 usec
Added interface eth0
EAPOL: External notification - portControl=Auto
Already associated with a configured network - generating associated event
Association info event
State: DISCONNECTED -> ASSOCIATED
Associated to a new BSS: BSSID=00:60:67:36:13:56
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
EAPOL: External notification - portControl=Auto
Associated with 00:60:67:36:13:56
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Cancelling scan request
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL - hexdump(len=4): 01 01 00 00
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth0
State: ASSOCIATED -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
No keys have been configured - skip key clearing
Cancelling scan request