Hi,<br>
<br>
I have two computers with Ubuntu 5.11 and kernel 2.6.10. In both of
them I have two PCMCIA slots that runs with the module i82365.<br>
<br>
I have four PCMCIAs with chipset "Prism2" as the followings:<br>
<br>
- 1 "NETGEAR MA401RA Wireless PC" with firmware<br>
PRI: v1.0.7<br>
STA: v1.3.6<br>
<br>
- 1 "CONCEPTRONIC CON11C" with firmware <br>
PRI: v0.3.0<br>
STA: v1.5.6<br>
<br>
- 2 "ALLIED TELESYN AT-WCL452" with firmware<br>
PRI: v1.1.0<br>
STA: v1.4.9<br>
<br>
The first two PCMCIA cards work well in both computers. <br>
<br>
The problem is with the two "Allied Telesyn" cards. They don't work
well in any computer, indistinctly of the order I put them. If I
combine them with a Netgear or with an Conceptronic, they continue
without working properly.<br>
<br>
If I put an Allied in one computer and I do an "iwconfig", it doesn't appear all the parameters as you can see:<br>
<br>
#root@zalux1:~ # iwconfig<br>
#<br>
#wifi1 IEEE 802.11-DS Mode:Ad-Hoc<br>
# Encryption key:off<br>
#<br>
#wlan1 IEEE 802.11-DS Mode:Ad-Hoc<br>
# Encryption key:off<br>
#
Link Quality:67/70 Signal level:-23 dBm Noise level:-90 dBm<br>
# Rx
invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br>
#
Tx excessive retries:0 Invalid misc:4 Missed beacon:0<br>
<br>
Furthermore, it doesn't let me change any parameter with "iwconfig":<br>
<br>
#root@zalux1:~ # iwconfig wlan1 essid wireless<br>
#Error for wireless request "Set ESSID" (8B1A) :<br>
# SET failed on device wlan1 ; Invalid argument.<br>
<br>
<br>
When I plug the "Allied", if I do "dmesg" it appears the following (it
always appears when there is another pcmcia card in the computer and I
put the "Allied" as the second one):<br>
<br>
#wlan1: hfa384x_cmd: entry still in list? (entry=c52904e0, type=0, res=-1)<br>
#wlan1: hfa384x_cmd: interrupted; err=-110<br>
#wlan1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc82, len=2)<br>
#wlan1: hfa384x_cmd_issue: cmd reg was busy for 5000 usec<br>
#wlan1: hfa384x_cmd_issue - timeout - reg=0x8021<br>
#wlan1: hfa384x_cmd: entry still in list? (entry=c52904e0, type=0, res=-1)<br>
#wlan1: hfa384x_cmd: interrupted; err=-110<br>
#wlan1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc09, len=2)<br>
#wlan1: hfa384x_cmd_issue: cmd reg was busy for 5000 usec<br>
#wlan1: hfa384x_cmd_issue - timeout - reg=0x8021<br>
#wlan1: hfa384x_cmd: entry still in list? (entry=c52904e0, type=0, res=-1)<br>
#wlan1: hfa384x_cmd: interrupted; err=-110<br>
#wlan1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd48, len=2)<br>
<br>
Does anyone see the problem?<br>
<br>
Thanks,<br>-- <br>---------------------------------------<br>Dani