<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE></TITLE>
<META http-equiv=Content-Type content=text/html;charset=ISO-8859-1>
<META content="MSHTML 6.00.2800.1458" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY text=#000000 bgColor=#ffffff>
<DIV><FONT face=Arial size=2>hi Beat Meier,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am using WPA-PSK, i enter the wpa_passphrase in
ascii format, such as:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>wpa_passphrase="secretpw"</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>are you saying that this won't work? How do i
generate a password and used it for wpa_passphrase? What command to
use??</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Please give an example. Many thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>victor</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">NOTES:
Have you tried to set radio card to one mode only i.e. for example only
802.11g<BR>istead of auto on both sides?<BR>If you are using a firewall and
set the ip adress of the interface you must restart the firewall<BR>so that
the rules are reloaded so the network is ok (ping etc.) but of course nothing
to to<BR>with wireless auth. <BR>Is using WPA-PSK how did you enter the pwd? I
hade problems because the ssid is in the pw<BR>of hostapd
i.e.<BR>wpa_passphrase="secret_pw" in hostapd.conf<BR>and<BR>psk="secret_pw"
in wpa_supplicant conf<BR>does not work!<BR>I've generated a pw
with<BR>wpa_passphrase <ssid> <passphrase><BR>and used this at
both ends<BR>on hostapd now it is also psk=""
stanza<BR></BLOCKQUOTE></BODY></HTML>