<div><font face="Arial" size="2">Hello!</font></div>
<div><font size="2"></font> </div>
<div><font face="Arial" size="2">We are trying to make our originaly developed platform working in WiFi mode (Linux kernel 2.6.2 PCMCIA 3.1.22 version).</font></div>
<div><font face="Arial" size="2">We are using orinoco ana hostap drivers but we have problems with both of them. We hipe that someone can help us. It would be really great if you could give us some advices.</font></div>
<div><font size="2"></font> </div>
<div><font size="2">By starting cardmgr we got a message:</font></div>
<div><font size="2"></font> </div>
<div>
<div><font face="Arial" size="2"><em>wlan0: could not get own MAC address<br>wlan0: Port type setting to 6 failed<br>wlan0: MAC port 0 enabling failed<br>cardmgr[133]: executing: './network start wlan0'<br>cardmgr[133]: + Error for wireless request "Set Mode" (8B06) :
<br>cardmgr[133]: + SET failed on device wlan0 ; Operation not supported.<br>cardmgr[133]: + Error for wireless request "Set ESSID" (8B1A) :<br>cardmgr[133]: + SET failed on device wlan0 ; Invalid argument.
<br>NET: Registered protocol family 17<br>dhcpcd[197]: dhcpStart: retrying MAC address request (returned 00:00:00:00:00:00<br>)<br>dhcpcd[197]: dhcpStart: retrying MAC address request (returned 00:00:00:00:00:</em></font>
</div>
<div><em><font face="Arial" size="2"></font></em> </div></div>
<div><font size="2"></font> </div>
<div><font size="2">here is <strong>dmesg</strong> report:</font></div>
<div><font size="2"></font> </div>
<div>
<div><font face="Arial" size="2"><em>prism2_hw_config: initialized in 16021 iterations<br>wlan0: trying to read PDA from 0x007f0000: OK<br>wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=0)<br>wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3eb6a0c, type=0, cm
<br>d=0x0021, param0=0xfd0b)<br>wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd0b, len=8)<br>Could not get RID for component NIC<br>wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=0)<br>
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3eb6a0c, type=0, cm<br>d=0x0021, param0=0xfd02)<br>wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd02, len=8)<br>Could not get RID for component PRI
<br>wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec<br>wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02<br>wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)<br>wlan0: hfa384x_cmd: interrupted; err=-110
<br>wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)<br>Could not get RID for component STA<br>wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec<br>wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02
<br>wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)<br>wlan0: hfa384x_cmd: interrupted; err=-110<br>wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)<br>wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
<br>wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02<br>wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)<br>wlan0: hfa384x_cmd: interrupted; err=-110<br>wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc01, len=6)
<br>wlan0: could not get own MAC address</em></font></div>
<div><font face="Arial" size="2">.........</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">Thanks in advance</font></div>
<div><font size="2"></font> </div>
<div><font size="2">Luka</font></div></div>