<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#c0dcc0>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Hi all,<BR>first of all, congrads to the 
developpers of hostapd.<BR>The code is well written, relatively easy to 
understand.... <BR>again, congrads !</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>I could manage to get the xsupplicant, hostapd 
wired and freeradius to work<BR>properly in a wired configuration : the 
supplicant runs on a Debian, hostapd<BR>runs on another Debian that has 3 
Ethernet NICs (no wireless at all).<BR>Freeradius runs on a Redhat 
9.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>The supplicant authenticates well with EAP-MD5. 
hostapd returns<BR>"Authenticated !" to the supplicant, everything's fine.... 
but.... Damn !<BR>There's a "but" :</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>My pb is that the Supplicant can always ping the IP 
of the NIC on which it<BR>is attached on the Authenticator that runs hostapd.... 
Seems like the NIC is<BR>always in the authorized state in the way it does not 
discard the frames<BR>that the supplicant sends when not authenticated 
yet.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Any suggestions ?</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>The setup :</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Supplicant ------------- ETH0 hostapd ETH2 
--------- WAN 
network<BR>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
|<BR>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
ETH1<BR>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
Freeradius</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>hostapd runs on eth0.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Many thanks</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>David.<BR>Note: Had to modify a few things... 
especially the EAPOL_VERSION was set to 2. <BR>The xsupplicant (open1x) and the 
Odyssey (Funk) supplicants did not <BR>like it at all, so I switched it back to 
1.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial 
size=2></FONT>&nbsp;</DIV></FONT></DIV></FONT></DIV></BODY></HTML>