<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=big5">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi,</FONT></DIV>
<DIV><FONT size=2> I've downloaded
0.3.2 to test, but it seems that the wep key</FONT></DIV>
<DIV><FONT size=2> does not set to the
driver when using 802.1x-md5.</FONT></DIV>
<DIV><FONT size=2> Does the profile
need special care ?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT
size=2>network={<BR> ssid="test"<BR> key_mgmt=IEEE8021X<BR> scan_ssid=1<BR> eap=MD5<BR> identity="<A
href="mailto:wayne@DEMO">wayne@DEMO</A>"<BR> password="1234"<BR> eapol_flags=0<BR> wep_key1="1234567890"<BR> wep_tx_keyidx=1<BR>}</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Regards,</FONT></DIV>
<DIV><FONT size=2>Wayne</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>On Wed, Dec 15, 2004 at 10:14:04AM +0800, wayne
wrote:</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>> Finally
got 802.1x-MD5 work.<BR>>
After authorized by the server, I need to enter the wep
key<BR>> manually. Then the
ping test will be ok.<BR>> It
seems that the wpa supplicant can't set the wep key to the
drive<BR>> when using
802.1x.<BR>> Can't wpa
supplicant set the wep key to the driver
if<BR>> user set the config
file to use wep key ?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>This was not supported for IEEE 802.1X mode; static WEP keys
could only<BR>be configured when using key_mgmt=NONE. I changed wpa_supplicant
to<BR>allow static WEP keys configured also for IEEE 802.1X mode,
assuming<BR>eapol_flags=0, i.e., dynamic WEP keys are not used.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>-- <BR>Jouni
Malinen
PGP id EFC895FA</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV></BODY></HTML>