<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Jouni Malinen wrote:
<blockquote cite="mid20040525131842.GA7341@jm.kir.nu" type="cite">
<pre wrap="">On Tue, May 25, 2004 at 12:44:42PM +0300, Sergey Basmanov wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Plugging PDR 0x0413 at 0x0000118a (len=2)
Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
Incompatible update data.
</pre>
</blockquote>
<pre wrap=""><!---->
Which version of prism2_srec are you using? Please try the latest
</pre>
</blockquote>
0.1.3 stable<br>
<blockquote cite="mid20040525131842.GA7341@jm.kir.nu" type="cite">
<pre wrap="">development snapshot which should ignore PDRs that point outside the
normal memory area.
</pre>
</blockquote>
Ok. Just tested with 0.2.1:<br>
<br>
Plugging PDR 0x0413 at 0x0000118a (len=2)<br>
Could not find data position for plugging PDR 0x0413 at 0x0000118a
(len=2)<br>
PDR 0x0413 is not in wlan card PDA and there is no default data.
Ignoring plug record.<br>
Plugging PDR 0x0414 at 0x007ee5a0 (len=36)<br>
PDR 0x0414 not found from wlan card PDA. Using default data.<br>
len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00
01 00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00<br>
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe<br>
OK.<br>
<br>
Host AP driver diagnostics information for 'wlan0'<br>
<br>
NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))<br>
PRIID: id=0x0015 v1.1.1<br>
STAID: id=0x001f v1.7.4 (station firmware)<br>
<br>
Seems that nothing happens. Or hostap_diag reads data stored in flash?<br>
Correct me if I'm wrong, but afaik rf010803.hex is for RAM download.<br>
<br>
Thanks.<br>
</body>
</html>