<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I would appreciate some guidance
please:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>tried to flash my Senaeo card to 1.7.4, failed.
I was pumped by the recent posts about flashing to the most recent
firmware, so i gathered what i thought i needed to flash to 1.7.4.</FONT></DIV>
<DIV><FONT face=Arial size=2>Latest CVS, and prism2_srec, firmware files
pk010101.hex, and sf010704.hex. The card is a NCCID: 800c, so, to
the best of my knowledge those were (are) the proper firmware files for
this card. It was in a PLX adapter, and ram dl to 1.5.6 at the time of the
"incedent".</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Well, without -f to test it gave what looked like a
common output, mentioned something about a few small things that looked like
they were more warnings than anything else (sorry, it was remote, i dont
have that mesg at this point if i can find it in a log somewhere ill post
it), and it ended with 'OK' which i incorrectly took to mean that this
was ok to use.</FONT></DIV>
<DIV><FONT face=Arial size=2>After many second thoughts (but not enough ;) i put
the -f in. flash failed. ...sigh...</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Please, no flames, just some
guidance. </FONT> <FONT face=Arial size=2>I have been searching
the archives (more recent stuff) and have all sorts of firmware, winupdate (2),
and even the dos util (i havent tried this yet, but i will). Windows will
find the card and make the "beep beep" sounds, but it has a blat on device
managler (driver installs win98), both the winupdates do nothing but make the
cursor go to the hourglass for a few seconds then nothing, doenst even install,
aparently. (0.5, and 0.7 winupdates).</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Do i need special hardware to fix this? pcmcia?
PLX? I have googled it, with most pointing back to the same documentation,
(pavel's or raf's, and sown.org). I seen to remember some more about dead
cards from earlier hostap mesgs, so ill search them more tomorrow, in
the meantime, if anyone has some specific ideas or advice, all help will be
appreciated.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jerry </FONT></DIV></BODY></HTML>