<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=big5">
<META content="MSHTML 6.00.2800.1141" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>hi all</DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>i use two wireless aps to establish wds link</DIV>
<DIV> </DIV>
<DIV>wlan0-----------
-------------wlan0</DIV>
<DIV>eth0------------- ap1 )))))))))))))((((((((((((((
ap2-------------eth0</DIV>
<DIV>wlan0wds0---- -----------wlan0wds0</DIV>
<DIV> </DIV>
<DIV>i use ping to check if the wds link between two aps is
ok ,</DIV>
<DIV>i let ap1 send ping packet to ap2,</DIV>
<DIV>but every ping packets send form ap1 to ap2 or send form ap2 to
ap1 were lost.</DIV>
<DIV> </DIV>
<DIV>so i try other ways,show below.</DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>1. i just remove eth0 form br0 at ap1(or ap2), ap1 and ap2 can
ping each other.</DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>wlan0-----------
-------------wlan0</DIV>
<DIV>
ap1 )))))))))))))(((((((((((((( ap2-------------eth0</DIV>
<DIV>wlan0wds0---- -----------wlan0wds0</DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>2. if i remove wlan0 form br0 at both aps,they still can not ping
each other.</DIV>
<DIV> </DIV>
<DIV>
<DIV>eth0------------- ap1 )))))))))))))((((((((((((((
ap2-------------eth0</DIV>
<DIV>wlan0wds0---- -----------wlan0wds0</DIV></DIV>
<DIV> </DIV>
<DIV>3.if i remove eth0 form br0 at both aps,they can ping each
other.</DIV>
<DIV><FONT size=2>
<DIV><FONT
size=3>wlan0-----------
-------------wlan0</FONT></DIV>
<DIV><FONT
size=3>
ap1 )))))))))))))(((((((((((((( ap2</FONT></DIV>
<DIV><FONT
size=3>wlan0wds0---- -----------wlan0wds0</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>why??</FONT></DIV>
<DIV> </DIV></FONT></DIV>
<DIV><FONT size=2></FONT><FONT size=2></FONT> </DIV></BODY></HTML>